I was flashing my phone and everything went fine but I turned it off and when I turned it on again it won't turn on/charge/connect/do anything!! I tried restoring with SETOOLS2 but it says GDFS doesn't open and I have my backup in my PC so I don't know why it is giving that error. Here is my log file attached and please... I beg you...any one of you....help me out! I am sure I have the backup of the GDFS it's fresh I backed it up today after flashing. I have another one before the flashing. Please help!!!

This is the error it's giving to me: welcome to setool2 lite edition v 1.08
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
ChipID:9900,EMP protocol:0301
RECOVERY BOOTROM MODE DETECTED
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:01127100289192 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
loader startup: executed
CSloader refused to start GDFS services,error is:29
failed, that is fatal
Elapsed:7 secs.
HELP!!!!!

try reflash main+fs with xs++3.1...this will help u...

Remove battery and put it again.
Flash only MAIN and see if it starts.

If LED is blinking, try updating EROm form Wotan (2+5 method)

Post results.

Thanks but I can't connect to either XS++ nor SETOOLS2 pressing the C button. Can I do this via the 2+5 metod ? Thanks!

*EDIT*

I flashed the Erom in wotan connecting via the 2+5 method but when I try to connect to either XS++ or SETOOLS2 when I try with the C button the LED flashes red. Can I flash my phone like this? Thanks!

BUMP

How do I flash MAIN using setools2? I can't find where it says to put the MAIN file....please help

what login and password do i use ? and how do i get 1 ?

wotan is not free! you must erase the username and the passwork and then update the erom.

@spartan123

You say when you try to connect via C button, phone flashes LED. Does it still getting connected? I mean, when you ask for Identify it shows log? If so, post it.

What else your phone do besides LED flashing?
Did you try charging battery? All this stuff you did could finished your battery. Try charging it.

charge the battery! plug the charger and see if the screen is starting.

Tried it and the only thing it does is flash red. I also tried flashing my phone and it gets stuck at some files. I am really desperate now.

Since it's getting stuck at some files, the flash chip might be corrupt. But I'm not sure thought.

Good luck anyways, if I hada w580i, I would have helped you more

Here's the log of SETOOLS just a few minutes ago.....please help....

welcome to setool2 lite edition v 1.08
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
FILE RECOGNIZED AS CUSTOMIZATION PACKAGE.

CDA:CDA102568/106
MODEL:HB1-06 Gen
VARIANT:AMERICA_1
LANGUAGE: EN
LANGUAGE: CF
LANGUAGE: XL

ChipID:9900,EMP protocol:0301
RECOVERY BOOTROM MODE DETECTED
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:01127100289192 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
writing C:\Documents and Settings\Z3R0\Desktop1_FS-MAIN-CDA W580_R6BC002_FS_AMERICA_1_RED52\W580_R6BC002_FS_AMERICA_1_RED52.fbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:4180
Will flash 209 blocks...
ldr blk write fail. fatal
ldr blk write fail. fatal
ldr blk write fail. fatal
ldr blk write fail. fatal
Abort all operations.
Send subblock NAK
Elapsed:146 secs.
ChipID:9900,EMP protocol:0301
RECOVERY BOOTROM MODE DETECTED
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:01127100289192 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
writing C:\Documents and Settings\Z3R0\Desktop1_FS-MAIN-CDA W580_R6BC002_FS_AMERICA_1_RED52\W580_R6BC002_MAIN_GENERIC_LA_RED52.mbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:9200
Will flash 460 blocks...
ldr blk write fail. fatal
ldr blk write fail. fatal
ldr blk write fail. fatal
Abort all operations.
Send subblock NAK
Elapsed:139 secs.

welcome to setool2 lite edition v 1.08
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
ChipID:9900,EMP protocol:0301
RECOVERY BOOTROM MODE DETECTED
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:01127100289192 CERT:RED
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
loader startup: executed
CSloader refused to start GDFS services,error is:29
failed, that is fatal
Elapsed:14 secs.

BUMP

bump

Please guys..... I REALLY NEED HELP...

BUMP

I saw a topic 3 days ago about this problem, here on se-nse, I can't remember where it is now thought, maybe you could find your answer there.