Hi there,i have a problem with my w810i phone, when i try to flash it with another firmware it writes that everything was succesful,but when i plug in phone again,nothing has changed,still the same firmware left
BTW i am using XS++ newest version (try older the same results), and now as you can see below i have R4CE012 version but i wanna to change it to R4EA031 or R4DB005 but i have no luck,maybe someone can helo me or it is just me that doing something wrong.
If you ask about fields in that "select firmware section" as a main i input for example W810_R4EA031_MAIN_GENERIC_HN_RED49.mbn and for File system W810_R4EA031_FS_EUROPE_2_RED49.fbn
[/b]
here is an example:
21:06:48| Baseband ID: 8040
21:06:48| DB2010 Marita compact
21:06:48| Protocol Version: 3.1
21:06:48|
21:06:48| Sending db2010_cid00_prodid_p3l.bin...
21:06:48| Applet ID: 061113 1250 ALUCXC125872_COMPACTPRODUCTION_ID_LOADER P3L
21:06:48| This is a PRODUCTION_ID loader
21:06:48| Activating GDFS...
21:06:49| Phone name detected!
21:06:49|
21:06:49| Profiling SEMC phone...
21:06:49| Baseband ID: DB2010
21:06:49| EROM CID: 49
21:06:49| EROM Color: Red
21:06:49| IMEI: 35906100xxxxxx
21:06:49| Phone ID: W810
21:06:49| Network: CENT_EUROPE
21:06:49| CDA: CDA102494/11 R11A
21:06:49| Firmware Version: R4CE012
21:06:49| EROM: n/a
21:06:49| Ready for operation!
21:07:19|
21:07:19| Sending db2010_cid49red_flash_r2a003.bin...
21:07:19| Applet ID: 060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
21:07:19| This is a FLASH loader
21:07:19| Now flashing firmware main...
21:07:22| Flashing c:\documents and settings\man\desktop\telefonui\se\w810_r4ea031_main_generic_hn_red49.mbn
21:07:22| Header type: BABE
21:07:22| 344 flashblocks
21:10:23| Finishing flash
21:10:23| Done flashing
21:10:23| Now flashing filesystem...
21:10:24| Flashing c:\documents and settings\man\desktop\telefonui\se\w810_r4ea031_fs_europe_2_red49.fbn
21:10:24| Header type: BABE
21:10:24| 161 flashblocks
21:11:44| Finishing flash
21:11:45| Done flashing
21:11:45| Flashing was successful
21:11:47| Disconnected... Unplug the phone
21:12:43| Error: Server not found!
21:13:05|
21:13:05| Attempting to open the interface...
21:13:05|
21:13:05| TURN OFF PHONE!
21:13:05| Hold 'C' button on phone and connect phone NOW.
21:13:05| You have 30 seconds...
21:13:05|
21:13:12| Did not receive 0x5a. Continuing
21:13:51| Disconnected... Unplug the phone
21:13:58|
21:13:58| Attempting to open the interface...
21:13:58|
21:13:58| TURN OFF PHONE!
21:13:58| Hold 'C' button on phone and connect phone NOW.
21:13:58| You have 30 seconds...
21:13:58|
21:14:07| Baseband ID: 8040
21:14:07| DB2010 Marita compact
21:14:07| Protocol Version: 3.1
21:14:07|
21:14:07| Sending db2010_cid00_prodid_p3l.bin...
21:14:07| Applet ID: 061113 1250 ALUCXC125872_COMPACTPRODUCTION_ID_LOADER P3L
21:14:07| This is a PRODUCTION_ID loader
21:14:07| Activating GDFS...
21:14:08| Phone name detected!
21:14:08|
21:14:08| Profiling SEMC phone...
21:14:08| Baseband ID: DB2010
21:14:08| OTP CID: 49
21:14:08| EROM CID: 49
21:14:08| EROM Color: Red
21:14:08| IMEI: 35906100xxxxxx
21:14:08| Phone ID: W810
21:14:08| Network: CENT_EUROPE
21:14:08| CDA: CDA102494/11 R11A
21:14:08| Firmware Version: R4CE012
21:14:08| EROM: n/a
21:14:08| Ready for operation!
Full Version: Need Help With Firmware Reinstalling
You need to customise your phone with the europe_2 custom pack
QUOTE (drdre20013 @ 2007-11-01 21:27) 
You need to customise your phone with the europe_2 custom pack
SO basically i need to choose main firmare,then FS and then choose customise with eu 2 pack, or it will be enough just to customise with that pack?
You already have the europe_2 fs so it justs needs customising with the europe_2 cust pack
Thanks a lot m8! 
btw is there any difference between eu 2 cda102494/15 and the same only 2 at the end?
btw is there any difference between eu 2 cda102494/15 and the same only 2 at the end?
QUOTE (drdre20013 @ 2007-11-01 21:30)
You already have the europe_2 fs so it justs needs customising with the europe_2 cust pack
just tried that still the firmware remains the same...
ok ummm, try a full flash with main fs and custom pack
QUOTE (drdre20013 @ 2007-11-01 22:00)
ok ummm, try a full flash with main fs and custom pack
tried that one as well, somehing strange is going on, checked that firmware it is ok,not the same only with the different title, i will try to find another,maybe that will solve the porblem :S
My XS++ says: RD
Whan my FW is EA.
but my FS is RD,
but a fullflash should always do the trick.
XS++ has some "errors" when viewing w810i's FW
Whan my FW is EA.
but my FS is RD,
but a fullflash should always do the trick.
XS++ has some "errors" when viewing w810i's FW
QUOTE (Mr. Thunderbird @ 2007-11-01 22:26)
My XS++ says: RD
Whan my FW is EA.
but my FS is RD,
but a fullflash should always do the trick.
XS++ has some "errors" when viewing w810i's FW
Whan my FW is EA.
but my FS is RD,
but a fullflash should always do the trick.
XS++ has some "errors" when viewing w810i's FW
you confused me
Ok,thanks everyone,solved the problem, after like 100 attempts i finally suceeded!!!!!
EVEN if XS++ says that you have version "XXXXX" you might have "FFFFF" or "HHHHH", XS++ sometimes shows you FILESYSTEM VERSION..
QUOTE (Mr. Thunderbird @ 2007-11-01 22:36)
EVEN if XS++ says that you have version "XXXXX" you might have "FFFFF" or "HHHHH", XS++ sometimes shows you FILESYSTEM VERSION..
ok,thanks fot the info !
No Problem,
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.