SE-NSE Forums > Tutorial | Using Far To Copy Files Off Db2012 & Db2020 Phones (win Only)

number1

2007-10-22 15:48

wot u will need
farmanager from www.farmanager.com or http://www.4shared.com/file/27136179/48b00...Manager170.html
sepf 10.0.44 from http://www.4shared.com/file/27135996/5a2ac...SEFP010044.html
sepf 10.0.51 from http://www.4shared.com/file/27555816/87e09...SEFP_01051.html
db2012 & db2020 boot scripts (SEPF) from http://www.4shared.com/file/27136065/59df1e26/SEFP.html
xml source generator from http://www.4shared.com/file/27136792/456c8...eGenerator.html
usb flash drivers from http://www.4shared.com/file/27136649/66d24c3d/gg-setup.html

a.to install the usb flash drivers download the .exe file and run the it

Before following this guide please have a full battery 90-100% and have usb flash drivers installed

1.install farmanager
2.go to programme files/Far/plugins
3.extract sepf 10.0.44 here
4.now extract sepf 10.0.51 in extactly the same place as 10.0.44
5.enter the SEFP folder and run sefp0.10.0.51patch.exe
6.now download SEFP.zip and extract the files to /Far/plugins
7.now run farmanager and press F11
8.select SEFP 0.10.51 FAR should look like

9.select DCU-60 under device,921600 under speed,then ur phone e.g db2020 cid:52 (u can use xs++3.1 to find this out and remeber to use erom cid)
10.press enter the matrix
11.u should see this

remove battery for a few secs and then reinsurt it and do what is says connect cable holding down C.
12.u will now see

13.click on FS
14.now wait a few minutes while it loads everything
15.now u will see

16.now browse around clicking the folders (.. above the folders is back), find wot file(s) u want to copy off. ifs,contains camdriver acoustics etc. tpa contains layout,menu etc. F8 deletes stuff if u find anything u don't want.
17.when u find wot file u want too copy off make a note of the path, use the right side of far too browse where u want too copy it to, then select the file u want copyed and press F5 then press copy copy off all the files from the same folder u want, it will write a 0byte files but this is ok.
18.now to disconnect from far safely, keep clicking back (..) until u see this

then click yes and disconnect ur phone, now do step 33
19.now run the xml source generator
20.and copy usb/other/ in the Enter destination box like this

21.press "select files that will be copied to the phone" then select all ur 0 byte files that u copied off with far
22.now type in the path of the files in the "Enter copy source" box u should have made a note of the path e.g tpa/preset/custom,
NOTE: Too copy stuff from the ifs folder you must use capital letters e.g IFS/SETTINGS/ACOUSTIC
23.now press "Generate XML source"
24.press "save as"
25.for file name type customize_upgrade.xml, it's very important u name it that
26.press save, save it somewhere easy to find
27.now follow steps 7-15 again
28.go to tpa/preset/custom
29.with the right side of far find ur customize_upgrade.xml
30.now highlight click it and press F5 then press copy
31.customize_upgrade.xml should now be in tpa/preset/custom on ur phone
32.follow step 18 again,
33.take out the batter then re-insurt it after a few secs,
34.now turn ur phone on, it will say "please wait" for about a minute leave it.
35.the file should be copied from the phone FS to the phone memory in the other folder.

silentser

2007-10-22 16:23

hi, in step 5, i couldn't find where is the patch

chris_b0ss

2007-10-22 16:31

you must download sepf 10.0.51!!!!!is at start of topic...good tuturorial btw!!

endz

2007-10-26 11:33

is this really work?

number1

2007-10-26 12:14

QUOTE (endz @ 2007-10-26 12:25)

is this really work?

yea corse it works, links are down at the moment i'm having trouble with 4shared

bracksisahobo

2007-10-26 12:15

Not bad!

photographer

2007-10-26 15:03

Yay

Thats great stuff mate. should be stickied

number1

2007-10-26 15:07

links working again

bojinx

2007-10-26 16:01

QUOTE (number1 @ 2007-10-26 10:59)

links working again

nice tutorial number1

it is a nice guide to a noob like me.
thanks mate!!

cRuNcHiE

2007-10-26 19:07

I cant get this to work with my k770i?

It does the please wait but i cannot see the files in the Other folder?

I can see them in usb/other in far manager though?

EDIT:

I believe on my phone it needs to goto tpa/user/other that worked

number1

2007-10-26 19:41

QUOTE (cRuNcHiE @ 2007-10-26 19:59)

I cant get this to work with my k770i?

It does the please wait but i cannot see the files in the Other folder?

I can see them in usb/other in far manager though?

can u post up the customize_upgrade.xml

chris_b0ss

2007-10-26 19:46

hey number1 i ''stole'' the link for usb flash driver for you..hope not to be angry....you were added on thanks list...don't get angry please.

number1

2007-10-26 19:52

QUOTE (chris_b0ss @ 2007-10-26 20:38)

hey number1 i ''stole'' the link for usb flash driver for you..hope not to be angry....you were added on thanks list...don't get angry please.

i don't mind

unsel2004

2007-10-27 09:41

QUOTE (silentser @ 2007-10-22 16:15)

hi, in step 5, i couldn't find where is the patch

hi
sorry for my bad englisch,i came from germany.i have downloadet the files,and im not found the patch..

can i help whou found the patch?

unsel

number1

2007-10-27 11:24

QUOTE (unsel2004 @ 2007-10-27 10:33)

hi
sorry for my bad englisch,i came from germany.i have downloadet the files,and im not found the patch..

can i help whou found the patch?

unsel

whoops i forgot to upload the patch, link updated

sanzou

2007-10-30 11:56

hey ... it is not working for me .... there no 'please wait' screen .... there's nothing at my other folder ....
how do you do that ?

EDIT: Now working ... =) i use default_upgrade.xml instead of customize ....

francoisrobb

2007-11-06 13:42

Hey,

I need some help, I looked in xs++ and it said my phone is DB2020 CID 51 so I opened far manager with bootscript db2020_51.

When I tried to open FS, I got a message saying it failed with error 0.
Here is the log. Any help would be appreciated...

CODE

Open SE Flash Plugin session. Ver 0.10.0.51
Loading settings...
Preparing settings dialog
Locating avaiable serial ports:
Found: COM10 ,COM4 ,COM6 ,COM7 ,COM8 ,COM9
Trying to get script list in: C:\Program Files\Far\Plugins\SEFP\\scripts
Found: db2012_50,db2012_51,db2020_49,db2020_51,db2020_52,k_00_CID29,k_00_CID29_v3,k_00_
ID29_v4,k_00_CID36,k_00_CID36_v3,k_00_CID36_v4,k600_CID36,k750_w800_CID36,k750_w
00_CID49,w300_w810_z550_cid49,w550_w600_CID49,z800_CID36
Trying to load script: db2020_51
Trying to open port: EPIUSB
Detected USB device: EPIUSB3
CID reading started. Connection Type is: DCU
Waiting for 1 byte(s)
0001 >> 5A
0001 << 3F
Waiting for 8 byte(s)
0008 >> 99 00 03 01 FF FF FF FF
k800 series detected
0002 << 53 37
EPIUSB: speed changed from 921600 to 921600
Executing script
Sending loader: C:\Program Files\Far\Plugins\SEFP\bin70129 0950 DB2020_PRODUCTIONIDLOADER_P3J.2020_1_BLUE
QH00 Header: $380
0004 << TiMED OUT
Wait for EsB
Waiting for 3 byte(s)
0003 >> TIMED OUT!
Read of 3 byte{s} timed out! Actualy read: 0
EsB read failed!

francoisrobb

2007-11-06 13:44

Okay it eventually worked after trying about 6 times

pepito

2007-11-17 18:12

This tutorial works great for me!!!

Thanks for your work.

mak2k

2007-11-18 06:39

it sort of worked.. it created a directory called usb/other in the root of the device.. but it doesn't go into the phone's memory in other file.

i'm using a w580.. maybe it has a different path?

lo little

2007-11-18 17:16

QUOTE (mak2k @ 2007-11-18 06:31)

it sort of worked.. it created a directory called usb/other in the root of the device.. but it doesn't go into the phone's memory in other file.

i'm using a w580.. maybe it has a different path?

im also using w580 and i got the same wierd

lo little

2007-11-18 17:30

fix for w580

instead of usb/other

use tpa/user/other

M

2007-11-19 21:49

you all.. this isnt workin for me! i even tried the w580 method and still nothing copied...heres the xml i used...

CODE

<?xml version="1.0" encoding="UTF-8"?>
<customization>
<file-operations>
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/BDSS_call.zapf" dest="tpa/usb/other/acoustic/BDSS_call.zapf" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/BDSS_play.zapf" dest="tpa/usb/other/acoustic/BDSS_play.zapf" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/BDSS_ring.zapf" dest="tpa/usb/other/acoustic/BDSS_ring.zapf" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/BT_call.zapf" dest="tpa/usb/other/acoustic/BT_call.zapf" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/BT_dsp_call.zapf" dest="tpa/usb/other/acoustic/BT_dsp_call.zapf" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/BT_hbh-6XX_call.zapf" dest="tpa/usb/other/acoustic/BT_hbh-6XX_call.zapf" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/BT_hbh-200_call.zapf" dest="tpa/usb/other/acoustic/BT_hbh-200_call.zapf" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/BT_hbh-300_call.zapf" dest="tpa/usb/other/acoustic/BT_hbh-300_call.zapf" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/BTC_call.zapf" dest="tpa/usb/other/acoustic/BTC_call.zapf" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/BTL_play.zapf" dest="tpa/usb/other/acoustic/BTL_play.zapf" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/BVHF_call.zapf" dest="tpa/usb/other/acoustic/BVHF_call.zapf" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/BVHF_play.zapf" dest="tpa/usb/other/acoustic/BVHF_play.zapf" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/BVHF_ring.zapf" dest="tpa/usb/other/acoustic/BVHF_ring.zapf" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/DSS_call.zapf" dest="tpa/usb/other/acoustic/DSS_call.zapf" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/DSS_play.zapf" dest="tpa/usb/other/acoustic/DSS_play.zapf" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/DSS_ring.zapf" dest="tpa/usb/other/acoustic/DSS_ring.zapf" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/farfield_call.aec" dest="tpa/usb/other/acoustic/farfield_call.aec" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/farfield_call.zapf" dest="tpa/usb/other/acoustic/farfield_call.zapf" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/farfield_fm.zapf" dest="tpa/usb/other/acoustic/farfield_fm.zapf" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/farfield_play.aec" dest="tpa/usb/other/acoustic/farfield_play.aec" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/farfield_play.zapf" dest="tpa/usb/other/acoustic/farfield_play.zapf" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/farfield_rec.zapf" dest="tpa/usb/other/acoustic/farfield_rec.zapf" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/farfield_ring.aec" dest="tpa/usb/other/acoustic/farfield_ring.aec" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/farfield_ring.zapf" dest="tpa/usb/other/acoustic/farfield_ring.zapf" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/handset_0_call.aec" dest="tpa/usb/other/acoustic/handset_0_call.aec" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/handset_0_call.zapf" dest="tpa/usb/other/acoustic/handset_0_call.zapf" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/LO_play.aec" dest="tpa/usb/other/acoustic/LO_play.aec" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/LO_play.zapf" dest="tpa/usb/other/acoustic/LO_play.zapf" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/NOTEDOUB.CFG" dest="tpa/usb/other/acoustic/NOTEDOUB.CFG" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/PHF_2_call.zapf" dest="tpa/usb/other/acoustic/PHF_2_call.zapf" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/PHF_2_play.zapf" dest="tpa/usb/other/acoustic/PHF_2_play.zapf" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/PHF_2_ring.zapf" dest="tpa/usb/other/acoustic/PHF_2_ring.zapf" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/PHF_3_call.zapf" dest="tpa/usb/other/acoustic/PHF_3_call.zapf" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/PHF_3_play.zapf" dest="tpa/usb/other/acoustic/PHF_3_play.zapf" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/PHF_3_ring.zapf" dest="tpa/usb/other/acoustic/PHF_3_ring.zapf" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/PHF_4_call.zapf" dest="tpa/usb/other/acoustic/PHF_4_call.zapf" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/PHF_4_play.zapf" dest="tpa/usb/other/acoustic/PHF_4_play.zapf" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/PHF_4_ring.zapf" dest="tpa/usb/other/acoustic/PHF_4_ring.zapf" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/PHF_call.aec" dest="tpa/usb/other/acoustic/PHF_call.aec" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/PHF_call.zapf" dest="tpa/usb/other/acoustic/PHF_call.zapf" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/PHF_play.aec" dest="tpa/usb/other/acoustic/PHF_play.aec" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/PHF_play.zapf" dest="tpa/usb/other/acoustic/PHF_play.zapf" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/PHF_ring.zapf" dest="tpa/usb/other/acoustic/PHF_ring.zapf" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/Sysconn_fm.zapf" dest="tpa/usb/other/acoustic/Sysconn_fm.zapf" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/TTY.zapf" dest="tpa/usb/other/acoustic/TTY.zapf" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/VHF_call.zapf" dest="tpa/usb/other/acoustic/VHF_call.zapf" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/VHF_hce-60_call.zapf" dest="tpa/usb/other/acoustic/VHF_hce-60_call.zapf" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/VHF_hce-60_play.zapf" dest="tpa/usb/other/acoustic/VHF_hce-60_play.zapf" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/VHF_hce-60_ring.zapf" dest="tpa/usb/other/acoustic/VHF_hce-60_ring.zapf" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/VHF_play.zapf" dest="tpa/usb/other/acoustic/VHF_play.zapf" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/VHF_ring.zapf" dest="tpa/usb/other/acoustic/VHF_ring.zapf" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/display/dispdriver0.dat" dest="tpa/usb/other/display/dispdriver0.dat" />
<file-op parse-mask="fa" op="copy" source="tpa/preset/system/menu/menu.ml" dest="tpa/usb/other/menu/menu.ml" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/camera/camdriver0.dat" dest="tpa/usb/other/camera/camdriver0.dat" />
</file-operations>
</customization>

plz help me...

93bh

2007-11-20 00:04

it same happened in my w580i, it didn't show up.

After, i use Far Manager and i saw customize_upgrade.xml was being remove automatically from tpa/present/custom.

M

2007-11-20 00:54

gosh...

same here the customize_upgrade.xml is being removed... but i did see the menu part appear...
wrt: menu.ml in the folder /tpa/usb/other/menu/ with this:

CODE

<file-op parse-mask="fa" op="copy" source="tpa/preset/system/menu/menu.ml" dest="tpa/usb/other/menu/menu.ml" />

so menu worked but nothing for the ones in the ifs folder

and i kinda need them to be backed up before i test hyper_t acoustics

ThilinaC

2007-11-20 04:24

great but got w810

number1

2007-11-20 09:58

QUOTE (mibaksh @ 2007-11-20 00:46)

gosh...

same here the customize_upgrade.xml is being removed... but i did see the menu part appear...
wrt: menu.ml in the folder /tpa/usb/other/menu/ with this:

CODE

<file-op parse-mask="fa" op="copy" source="tpa/preset/system/menu/menu.ml" dest="tpa/usb/other/menu/menu.ml" />

so menu worked but nothing for the ones in the ifs folder

and i kinda need them to be backed up before i test hyper_t acoustics

try naming it default_upgrade.xml

lo little

2007-11-20 18:55

yh ifs is kinda wierd i used my way above into tpa/user/other but they just dont budge lol ill try again see if i can come up with anythin

edit: i have found that it wont take the camdriver0.dat from ifs/settings/camera so i think it doesnt work with ifs directory but works fine in the tpa seen as i have taken the flash menus, lighteffects ect from the tpa directory

M

2007-11-20 20:45

scene.. i jus wanted the pak i made with acoustics... cuz its nice... and i dnt wanna lose it... but i seemed to find it , at least i think so, so no need for this yet and if we need a full fledged backup.. use this method:

tut | how to extract FS

thanks a lot guys... again!

but ill try the default upgrade tho... soon.. i jus got back from school... we had football aka soccer competition all day! fun stuff!

tanjiajun_34

2007-11-21 10:27

Can someone just zip the whole Plugin folder instead of keep extracting cos it always did not work....

Whosat

2007-11-21 11:15

You're from Singapore, right...

Don't use any download accelerators, else it'll corrupt. Tried before.

Whosat

2007-11-21 11:24

"select SEFP 0.10.51 FAR should look like"

Should be "select SEFP 10.0.51 FAR should look like" =D

Too scared to mess around with those, seeing people having problems already. I shall just wait patiently for the next XS++, which, hopefully, will allow me to download files from the phone fs... T.T

93bh

2007-11-23 22:48

Yay! It's working, I changed usb/other/ to tpa/user/other/(only works in w580i or maybe)

Thanks lo little!

copying file from phone memory to the computer is working.

but it doesn't work for ifs

edit:edit: please don't delete it or else, it will be gone.

just delete custom_upgrade.xml or default_upgrade.xml from tpa/preset/custom/

just delete it from " other" folder, nothing happen on w580i

vpraveenis

2007-11-25 18:03

HI, I would like to point out a small change in the tutorial......In page 1

Step 8 actually is "8.select SEFP 0.10.51 FAR should look like"

But should actually be "8.select SEFP 0.10.0.44 FAR should look like"

Otherwise i could not find the db2020_52 option. Hope number1 makes the change in the next version....

An excellent tutorial by the way. I was stuck with many dead folders which I added for walkman skin and could not remove the folders with xs++.. this tutorial saved my phone from many junk files.

-Spyder-

2007-11-30 23:53

Ive got Far Manager working ok but when i come to copying files from the tpa directory the files are just blank, always show 0KB under the file ive copied to the computer and show nothing in notepad or anything else? Is there something i missed?

djsquare

2007-12-05 08:50

[font="Georgia"][/font][size="7"][/size][color="#FF0000"][/color]

Can anybody solve this Problem :-
1) Wenever i try to access file system directly by pressing enter on FS or Flash then it gives me blank folder, for that I have to press Alt F3 to read the Fs folder after that I can hit the enter Key, but after that wenvere I try to access other folders under FS then I get the following error

number1

2007-12-06 12:27

i don't think this works on the newest firmware R8BA024.
i can't get it too work ever since i upgraded to R8BA024, if this guide doesn't work for u then please post what firmware your running

rafucho

2007-12-08 01:47

I can't patch, windows xp sp2 pro, it doesn't want to. It tells me, that I don't have permission!!
naughty...
should i not patch this?

1xinfusion

2007-12-13 07:07

NICE i got it working, heres me code

CODE

<?xml version="1.0" encoding="UTF-8"?>
<customization>
<file-operations>
<file-op parse-mask="fa" op="copy" source="tpa/preset/custom/CONTENT_DOWNLOAD_HOOK_2.itm" dest="tpa/user/other/CONTENT_DOWNLOAD_HOOK_2.itm" />
<file-op parse-mask="fa" op="copy" source="tpa/preset/custom/customize.xml" dest="tpa/user/other/customize.xml" />
<file-op parse-mask="fa" op="copy" source="tpa/preset/custom/DESKTOP_HOOK_2.itm" dest="tpa/user/other/DESKTOP_HOOK_2.itm" />
<file-op parse-mask="fa" op="copy" source="tpa/preset/custom/FM_PICTURES_HOOK_3.itm" dest="tpa/user/other/FM_PICTURES_HOOK_3.itm" />
<file-op parse-mask="fa" op="copy" source="tpa/preset/custom/FM_SOUNDS_HOOK_3.itm" dest="tpa/user/other/FM_SOUNDS_HOOK_3.itm" />
<file-op parse-mask="fa" op="copy" source="tpa/preset/custom/FM_THEMES_HOOK_3.itm" dest="tpa/user/other/FM_THEMES_HOOK_3.itm" />
<file-op parse-mask="fa" op="copy" source="tpa/preset/custom/FM_VIDEOS_HOOK_3.itm" dest="tpa/user/other/FM_VIDEOS_HOOK_3.itm" />
<file-op parse-mask="fa" op="copy" source="tpa/preset/custom/GAMES_HOOK_3.itm" dest="tpa/user/other/GAMES_HOOK_3.itm" />
</file-operations>
</customization>

there is more code but i shortened it for i do not want to spam this forum

EDIT: by the way, i posted this because there were people talking about having trouble with the w580 here. I did this on a w580 so yeah.

EDIT: I realized it copied to the phone memory. is there no way to copy to the memory stick directory?

memeko

2007-12-15 16:15

ATTENTION !!!!!!

Don't run sefp0.10.0.51patch.exe it's infected
The program runs just fine without running that "patch".
Don't infect your machine!

Hope this saves someone to run it.

Regards

sanzou

2007-12-17 05:45

QUOTE (mibaksh @ 2007-11-19 21:41)

you all.. this isnt workin for me! i even tried the w580 method and still nothing copied...heres the xml i used...

CODE

<?xml version="1.0" encoding="UTF-8"?>
<customization>
<file-operations>
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/BDSS_call.zapf" dest="tpa/usb/other/acoustic/BDSS_call.zapf" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/BDSS_play.zapf" dest="tpa/usb/other/acoustic/BDSS_play.zapf" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/BDSS_ring.zapf" dest="tpa/usb/other/acoustic/BDSS_ring.zapf" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/BT_call.zapf" dest="tpa/usb/other/acoustic/BT_call.zapf" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/BT_dsp_call.zapf" dest="tpa/usb/other/acoustic/BT_dsp_call.zapf" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/BT_hbh-6XX_call.zapf" dest="tpa/usb/other/acoustic/BT_hbh-6XX_call.zapf" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/BT_hbh-200_call.zapf" dest="tpa/usb/other/acoustic/BT_hbh-200_call.zapf" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/BT_hbh-300_call.zapf" dest="tpa/usb/other/acoustic/BT_hbh-300_call.zapf" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/BTC_call.zapf" dest="tpa/usb/other/acoustic/BTC_call.zapf" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/BTL_play.zapf" dest="tpa/usb/other/acoustic/BTL_play.zapf" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/BVHF_call.zapf" dest="tpa/usb/other/acoustic/BVHF_call.zapf" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/BVHF_play.zapf" dest="tpa/usb/other/acoustic/BVHF_play.zapf" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/BVHF_ring.zapf" dest="tpa/usb/other/acoustic/BVHF_ring.zapf" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/DSS_call.zapf" dest="tpa/usb/other/acoustic/DSS_call.zapf" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/DSS_play.zapf" dest="tpa/usb/other/acoustic/DSS_play.zapf" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/DSS_ring.zapf" dest="tpa/usb/other/acoustic/DSS_ring.zapf" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/farfield_call.aec" dest="tpa/usb/other/acoustic/farfield_call.aec" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/farfield_call.zapf" dest="tpa/usb/other/acoustic/farfield_call.zapf" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/farfield_fm.zapf" dest="tpa/usb/other/acoustic/farfield_fm.zapf" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/farfield_play.aec" dest="tpa/usb/other/acoustic/farfield_play.aec" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/farfield_play.zapf" dest="tpa/usb/other/acoustic/farfield_play.zapf" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/farfield_rec.zapf" dest="tpa/usb/other/acoustic/farfield_rec.zapf" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/farfield_ring.aec" dest="tpa/usb/other/acoustic/farfield_ring.aec" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/farfield_ring.zapf" dest="tpa/usb/other/acoustic/farfield_ring.zapf" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/handset_0_call.aec" dest="tpa/usb/other/acoustic/handset_0_call.aec" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/handset_0_call.zapf" dest="tpa/usb/other/acoustic/handset_0_call.zapf" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/LO_play.aec" dest="tpa/usb/other/acoustic/LO_play.aec" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/LO_play.zapf" dest="tpa/usb/other/acoustic/LO_play.zapf" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/NOTEDOUB.CFG" dest="tpa/usb/other/acoustic/NOTEDOUB.CFG" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/PHF_2_call.zapf" dest="tpa/usb/other/acoustic/PHF_2_call.zapf" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/PHF_2_play.zapf" dest="tpa/usb/other/acoustic/PHF_2_play.zapf" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/PHF_2_ring.zapf" dest="tpa/usb/other/acoustic/PHF_2_ring.zapf" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/PHF_3_call.zapf" dest="tpa/usb/other/acoustic/PHF_3_call.zapf" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/PHF_3_play.zapf" dest="tpa/usb/other/acoustic/PHF_3_play.zapf" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/PHF_3_ring.zapf" dest="tpa/usb/other/acoustic/PHF_3_ring.zapf" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/PHF_4_call.zapf" dest="tpa/usb/other/acoustic/PHF_4_call.zapf" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/PHF_4_play.zapf" dest="tpa/usb/other/acoustic/PHF_4_play.zapf" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/PHF_4_ring.zapf" dest="tpa/usb/other/acoustic/PHF_4_ring.zapf" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/PHF_call.aec" dest="tpa/usb/other/acoustic/PHF_call.aec" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/PHF_call.zapf" dest="tpa/usb/other/acoustic/PHF_call.zapf" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/PHF_play.aec" dest="tpa/usb/other/acoustic/PHF_play.aec" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/PHF_play.zapf" dest="tpa/usb/other/acoustic/PHF_play.zapf" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/PHF_ring.zapf" dest="tpa/usb/other/acoustic/PHF_ring.zapf" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/Sysconn_fm.zapf" dest="tpa/usb/other/acoustic/Sysconn_fm.zapf" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/TTY.zapf" dest="tpa/usb/other/acoustic/TTY.zapf" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/VHF_call.zapf" dest="tpa/usb/other/acoustic/VHF_call.zapf" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/VHF_hce-60_call.zapf" dest="tpa/usb/other/acoustic/VHF_hce-60_call.zapf" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/VHF_hce-60_play.zapf" dest="tpa/usb/other/acoustic/VHF_hce-60_play.zapf" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/VHF_hce-60_ring.zapf" dest="tpa/usb/other/acoustic/VHF_hce-60_ring.zapf" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/VHF_play.zapf" dest="tpa/usb/other/acoustic/VHF_play.zapf" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/acoustic/VHF_ring.zapf" dest="tpa/usb/other/acoustic/VHF_ring.zapf" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/display/dispdriver0.dat" dest="tpa/usb/other/display/dispdriver0.dat" />
<file-op parse-mask="fa" op="copy" source="tpa/preset/system/menu/menu.ml" dest="tpa/usb/other/menu/menu.ml" />
<file-op parse-mask="fa" op="copy" source="ifs/settings/camera/camdriver0.dat" dest="tpa/usb/other/camera/camdriver0.dat" />
</file-operations>
</customization>

plz help me...

you must use capital letter if you copy from IFS directory ....
Example : IFS/SETTINGS/ACOUSTIC/PHF_call.zapf

QUOTE (number1 @ 2007-11-20 09:50)

try naming it default_upgrade.xml

yes ...
but you will need to put it inside default directory instead of customize.

Kaos

2007-12-29 04:45

[font="Arial"][size=4]1.install farmanager
2.go to programme files/Far/plugins
3.extract sepf 10.0.44 here
4.now extract sepf 10.0.51 in extactly the same place as 10.0.44
5.enter the SEFP folder and run sefp0.10.0.51patch.exe
6.now download SEFP.zip and extract the files to /Far/plugins
7.now run farmanager and press F11
8.select SEFP 0.10.51 FAR should look like
[/quote]

Hi Im a noob and I have tryed so many ways to get this to work can some one explain these steps in more detail every time i try to run the plugin it says
Plugin call error
"Unknown exception"

then

internal error
"Unknown exception"

Can any body help me with this please

Thanks in advance

hataricus

2007-12-29 12:23

thank you man, great stuff

hataricus

2007-12-29 14:41

QUOTE (lo little @ 2007-11-18 19:22)

fix for w580

instead of usb/other

use tpa/user/other

same for my W880 -> instead of usb/other I used tpa/user/other
i guess that most 2006+ released SE`s have tpa/user system folder instead of the usb/ one

thnx again

Kaos

2007-12-31 02:08

hi foe every one including myself that cant get SEFP plugin to work there is an alternative just go to 4share and search for keyword JDflasher once u download it just install far manager and drag JDflasher into plugins folder then hit alt F1 and select just da flasher and its pritty straight forword from there

got this info from:
http://www.howardforums.com/showpost.php?p...amp;postcount=1

mazeko

2008-01-04 23:28

i cant download this file(DB2020-2010,SEFP,XmlGenerator.etc) from the address link.when i klik download,the page back again on the first page when im open *comfused*

serp600

2008-01-06 15:59

hi,
can i copy files from my pc to the phone with far manager? i have a k800 db202 erom cid 52.
if lts say i delete the camdriver0.dat file and replace it with a modded one will it work?
thanks

roni21

2008-01-06 16:07

yes

roni21

2008-01-06 16:19

yes

d.o.a

2008-01-07 06:29

Okay there is a lot to take in here with all the logs and what not but do I have this clear I am using a W580i on AT&T so to get Flash menus I have to use tpa/user/other path for the customize_upgrade.xml file after all is done with the initial tutorial? If Im wrong then do I have to debrand first?