Flash And Patch Your Cid49 K750/d750/w800, Tutorial for "instant" flashing and finalizing Options

[jagheterfredrik]

Estimated time: 12-20 minutes.

First, sign up at www.topsony.com, you'll need resources from there.

Now go here
http://www.topsony.com/foro/cmps_index.php...e=info_lenguaje
and find out which Package corresponds to your Language.

In this tutorial i will flash a K750 to a W800 R1BC EU_4, patch the firmware to be able to listen to radio without headset, and "finalize" with the finalization-patch (**NOTE:Finalization-patch is unnecessary since XS++ can breakin!).

So first head over to www.topsony.com and download the W800 firmware;
W800_R1BC002_MAIN_EU_EMEA.rar <-- This is the main-flash.
W800_R1BC002_FS_EU4.rar <-- This is the FS (File-system)-flash.

Download your files and extract them.

Now you'll need to download the GSlide from here.
You'll also need the finalization-patch from here. Mine is w800_r1bc002_change_custom_folder.zip (**NOTE:Finalization-patch is unnecessary since XS++ can breakin!).
In this tutorial I'll also apply the radio-patch, available at www.topsony.com.
You'll also need XS++

Now, extract and open GSlide.



So here we have to prepare the main-flash:
1. Click the "..." and choose the main-flash that you downloaded.
2. Click add patches and add the finalization-patch (for your firmware (**NOTE:Finalization-patch is unnecessary since XS++ can breakin!)) and any additional patches you'd like.
3. Now select the output file, this will be your new main-flash. (i.e "mainflash.bin")
4. Click process and wait and hopefully you'll get to:
5. "Done."

Addition
Now the main-flash is done. Remember where you saved it.
Now over to the file-system-flash:
1. Click the "..." again and this time choose your file-system flash.
2. Do not add any patches here this time.
3. Select an output-file so that you know where you've put it. (i.e "filesystem.bin")
4. Click process and wait and again you'll hopefully get
5. "Done."

(**NOTE:This part is unnecessary since XS++ can breakin! Jump to flashing-procedure)
Now you need to access the memory-stick-card. This can either be done through a card-reader or trough plugging the phone in with the cable, while the phone is on.
When the card pops up, goto the root directory and create a folder called custom, like "X:\custom\".
Now go either to topsony or here and download the custom-pack corresponding to your firmware and "Package" (From the beginning remember? Mine: EU_4).



Now extract the custom-pack ("pack.zip\tpa\preset\custom") into your newly created folder ("X:\custom\") and then proceed to flashing.



Now download and unrar XS++
Connect your phone properly.
Click main-flash, choose the file you got from GSlide. (in my case "mainflash.bin")
Click file-system and choose the file you also got from GSlide. (in my case "filesystem.bin")
Click finalize and choose the model of the phone you are flashing to and the CDA gathered earlier.
Make sure everything looks like in the picture and click flash.

Done!

Any additions are welcome!

This post has been edited by jagheterfredrik: 2007-01-13 17:28

Attached File(s)

 tut1.jpg ( 94.31K ) Number of downloads: 3261
 tut2.jpg ( 161.42K ) Number of downloads: 2433
 tut3.jpg ( 100.45K ) Number of downloads: 2357

 

[Jacks]

WOW !!

Just wonderful

My respect

Regards

[zzzgim]

That's nice, jagheterfredrik! ;]

[kirpeace]

thanks very much but how can we get the original firmware back and anyone else has tried it pls

This post has been edited by kirpeace: 2006-12-23 07:53

[Manos]

Is there a change-custom-folder patch for K750 cuz I can't find one

This post has been edited by Manos: 2006-12-23 09:25

[jagheterfredrik]

thanks very much but how can we get the original firmware back and anyone else has tried it pls

Flash it using K750 firmware or run it through SEUS.

Is there a change-custom-folder patch for K750 cuz I can't find one

http://forums.se-nse.net/index.php?showtopic=6378, as said in the tutorial.

[Manos]

Thanks

[zuzu_zuzu]

i did exactly like u said.. and now when i open my phone it says ... "configuration error. please contact your network operator or service centre " and i can`t do nottin to pass this thing... what should i do : ((

[afghanjohnny]

i did exactly like u said.. and now when i open my phone it says ... "configuration error. please contact your network operator or service centre " and i can`t do nottin to pass this thing... what should i do : ((

What phone are you using? What patches? Did you make a custom folder on your card? And copied the files from your custpack?

[sunzqi]

W800_R1BC002_FS_EU4.rar <-- This is the FS (Filesystem)-flash.

this Filesystem is CID36. can flash for CID49 K750 ?

[jagheterfredrik]

CID49 W800 filesystem are not available so you have to slide them, though if you're flashing K750 you could use the CID49-filesystem.

This post has been edited by jagheterfredrik: 2006-12-23 15:34

[hemant_1988]

hey guys
ive jus flashed w800i main using phonexs.
i had previously a r1db001
i wanted to rollback to r1ca021 using phonexs
but even after 14-16 hrs it wasnt done


so my question is how much time will this take
as much as phonexs??or lesser
thanks

[konrad.55]

to jagheterfredrik
can i flash my k750i(cid 49) by use your Tutorial

i want use W800_R1BC002_MAIN_EU_EMEA.rar and W800_R1BC002_FS_EMEA1.rar

its be ok??

[jagheterfredrik]

hey guys
ive jus flashed w800i main using phonexs.
i had previously a r1db001
i wanted to rollback to r1ca021 using phonexs
but even after 14-16 hrs it wasnt done
so my question is how much time will this take
as much as phonexs??or lesser
thanks

People tend to not read the first line of the first post:

Estimated time: 12-20 minutes.

to jagheterfredrik
can i flash my k750i(cid 49) by use your Tutorial

i want use W800_R1BC002_MAIN_EU_EMEA.rar and W800_R1BC002_FS_EMEA1.rar

its be ok??

That's exactly what the tutorial shows isn't it ? = Yes
Afaik noone tried sliding the Filesystem, please try, it should work.

This post has been edited by jagheterfredrik: 2006-12-23 16:51

[Robbyuk]

If I Slide The Filesystem " W800_R1BC002_FS_EMEA1", What customization files should i use ? the w800 ones ? do i need to change the customization.xml ?

[Karun]

@Fredrik

how much time does the whole procedure take.....i mean right from patching the phone with gslide and then flashing firmware with phoneXS? cause i read somwhere that it may take upto 5 hrs to flash a cid49 k750i with phoneXS

[Robbyuk]

Basicly it took me 5 mins tops to flash the w800 firmware onto my phone , i didnt touch the fs or customize the phone , if u just want to have the walkman feature just flash the main "IT Will take u less than 5 mins ! "


*Also on a side note if you are just adding patches to your current k750i firmware using gslide u only have to flash the main , like i said above less than 5 mins*

This post has been edited by Robbyuk: 2006-12-23 17:15

[prp]

Hi is it possible k800i finalization-patch?

[jagheterfredrik]

If I Slide The Filesystem " W800_R1BC002_FS_EMEA1", What customization files should i use ? the w800 ones ? do i need to change the customization.xml ?

use the customization files for W800 R1BC002 EMEA1.

@Fredrik

how much time does the whole procedure take.....i mean right from patching the phone with gslide and then flashing firmware with phoneXS? cause i read somwhere that it may take upto 5 hrs to flash a cid49 k750i with phoneXS

12-20 minutes. GSlide do not patch the phone. It patches the firmware.

Hi is it possible k800i finalization-patch?

Yes, but GSlide doesn't support K800 (DB2020). And you wouldn't be able to flash because there is no loader for DB2020 that can flash this type of modified firmwares.

This post has been edited by jagheterfredrik: 2006-12-23 17:37

[Robbyuk]

Right Just thought id Post to Say that ive flashed my Firmware/Filesystem Within 10 mins ! thanks to fred for showing me the way ! ,These are the 3 files i used
"W800_R1BC002_MAIN_EU_EMEA.bin" /"W800_R1BC002_FS_EMEA1.bin" /W800i_CDA102430_1_EMEA_1.zip

I Sent Both The patches Through Gslide , Added the Change Cust Folder Patch "w800_r1bc002_change_custom_folder.vkp" to main firmware then transfered the customize folder accross to my memstick !

Then Flashed the Main/ Filesystem With the 2 gslide files ! Thanks for the help

*Also fred could you add to your guide that u need to send the filesystem through gslide ? !

This post has been edited by Robbyuk: 2006-12-23 18:16