W810i Problems Flashing, cannot flash fs Options

[razvan_06]

Hi guys...i have a strange problem with a w810i...i cannot flash the fs ...main it's ok (after a few tries) but fs says as follows "22:41:01| Hold 'C' button on phone and connect phone NOW.

22:41:01| You have 30 seconds...
22:41:01|
22:41:05| Baseband ID: 8040
22:41:05| Protocol Version: 3.1
22:41:05|
22:41:05| Sending db2010_cid00_prodid_p3l.bin...
22:41:05| Applet ID: 061113 1250 ALUCXC125872_COMPACTPRODUCTION_ID_LOADER P3L
22:41:05| This is a PRODUCTION_ID loader
22:41:05| Activating GDFS...
22:41:06| Phone name detected!
22:41:06|
22:41:06| Profiling SEMC phone...
22:41:06| Platform: DB2010
22:41:06| OTP CID: 49
22:41:06| EROM CID: 49
22:41:06| EROM Color: Red
22:41:06| IMEI: 35233601xxxxxx
22:41:06| Phone ID: W810
22:41:06| Region: EUROPE_4
22:41:06| CDA: CDA102555/13 R2A
22:41:06| Firmware Version: R4ED001
22:41:06| EROM: n/a
22:41:06| Ready for operation!
22:41:18|
22:41:18| Sending db2010_cid49red_flash_r2a003.bin...
22:41:18| Header: Error 0x10
22:41:18| Error: Cannot send flash loader
22:41:18| Error: Flashing failed
22:41:20| Disconnected... Unplug the phone


I'm trying to flash the following software:' W810_R4CE012_FS_EUROPE_4_RED49.fbn and W810_R4CE012_MAIN_GENERIC_HN_RED49.mbn...when i try to connect it to xs3.1 it sometimes says this: Hold 'C' button on phone and connect phone NOW.

22:32:01| You have 30 seconds...
22:32:01|
22:32:07| Baseband ID: 8040
22:32:07| Protocol Version: 3.1
22:32:07|
22:32:07| Sending db2010_cid00_prodid_p3l.bin...
22:32:07| Payload: Failed
22:32:07| Sending PRODUCTION_ID LOADER
22:32:07|
22:32:07| Sending db2010_cid00_prodid_p3l.bin...
22:32:07| Header: Failed
22:32:07| Activating GDFS...
22:32:14| Disconnected... Unplug the phone

but after i try to connect it for a few times i can only manage to flash the main: Profiling SEMC phone...


22:33:00| Platform: DB2010
22:33:00| OTP CID: 49
22:33:00| EROM CID: 49
22:33:00| EROM Color: Red
22:33:00| IMEI: 35233601xxxxxx
22:33:00| Phone ID: W810
22:33:00| Region: EUROPE_4
22:33:00| CDA: CDA102555/13 R2A
22:33:00| Firmware Version: R4ED001
22:33:00| EROM: n/a
22:33:00| Ready for operation!
22:34:36|
22:34:36| Sending db2010_cid49red_flash_r2a003.bin...
22:34:37| Applet ID: 060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
22:34:37| This is a FLASH loader
22:34:37| Now flashing firmware main...
22:34:37| Flashing e:\documents and settings\razvan\desktop\w810\w810_r4ce012_main_generic_hn_red49.mbn
22:34:37| Header type: BABE
22:34:37| 342 flashblocks
22:37:37| Finishing flash
22:37:38| Done flashing
22:37:38| Flashing was successful
22:37:40| Disconnected... Unplug the phone..never the fs ..and I don't know what to do..please help

This post has been edited by razvan_06: 2009-08-22 19:53

[cchaos]

Try again with the FS from a different source

[razvan_06]

Try again with the FS from a different source

I tried with another firmware...same problem..after 3-4 tries it connects but when i press the flash button in xs++ it says :

Sending db2010_cid49red_flash_r2a003.bin...
21:35:03| Header: Error 0x10
21:35:03| Error: Cannot send flash loader
21:35:03| Error: Flashing failed
21:35:05| Disconnected... Unplug the phone
21:35:22|

same if I want to customize....se tool says something about Possible Recovery Needed...How do I do that?

This is the SeTool 2 Lite log:

ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
loader prologue not accepted
phone pre-boot failed,possible RECOVERY needed.
Elapsed:10 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
err: 32 (30)
loader header not accepted
phone pre-boot failed,possible RECOVERY needed.
Elapsed:4 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:***************** CERT:RED
ldr_on_ldr hdr no ack (10)
Elapsed:7 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
err: 39 (30)
loader payload not accepted
phone pre-boot failed,possible RECOVERY needed.
Elapsed:11 secs.

This post has been edited by razvan_06: 2009-08-23 05:31

[AnonymUser]

Hello
@ razvan_06 why do you not flash with setool2lite. I have my w810i with this software flash and I havn't no problems.

[cchaos]

Hello
@ razvan_06 why do you not flash with setool2lite. I have my w810i with this software flash and I havn't no problems.

Hes just tried that

[razvan_06]

Yeah...I tried that...and finally managed to flash it "main and fs"....but now..it has the same problem when I try to customize it...and so I ask you again...how can I customize it with se toll lite 2...because with xs++ it's impossible to connect.. I know there was a setool tutorial somewhere here on the forum but I cannot find it and I'm loosing my patience

This post has been edited by razvan_06: 2009-08-23 17:47

[Boysie]

For SETool2lite the custom files have to be in a zip file and in the correct folder structure ie tpa/preset/custom.