K 530 /w660 Not Turing On Options

[aswinvs]

Hello all

I have k530i set , i have changed the firmware to w660i and was successfull and its being working for almost 9 months there was not at all a problem

yesterday i switch off the mobile . then when i tried to switch on there is nothing in the screen
the phone seems like DEAD :crying:

Now i have setool xs++ and kulakendi client

Now xs++ does not detect the phone when i try to use 2+5 combination it shows .5x continuing something like that

then i tried unlock/repair as said in akshayy.com then i got this log
Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition – please visit http://www.setool.net and buy FULL.

ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
Flash ID check:2019
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:3xxxxxxx099 CERT:N/A
FLASH CID:52 COLOR:RED
no ack during gdfs_readvar !
Can’t read SCRC unit
Elapsed:84 secs.
Elapsed:84 secs.

when i bought the set i have taken the gdfs backup of K530i
and when i changed that to w660i i took one more backup

then i tried to use write gdfs using 2+5 detection in setool i got this log

ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:3xxxx1**99 CERT:N/A
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:2019
Flash props sent ok
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
loader startup: executed
CSloader refused to start GDFS services,error is:29
failed, that is fatal
Elapsed:8 secs.

Am able to flash my Main as well as the FS using SE Tool FLASH BY Pressing 2+5

ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35901901xxx099 CERT:N/A
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:2019
Flash props sent ok
writing E:\Sony Ericcson Modding\K530i\K530_R8BB001_FS_CENT_EUROPE_RED52\K530_R8BB001_FS_CENT_EUROPE_RED52.fbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:3300
Will flash 165 blocks...
SSW loading returns:0
Elapsed:101 secs.


ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:359xxxxxxx99 CERT:N/A
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:2019
Flash props sent ok
writing E:\Sony Ericcson Modding\K530i\K530_R8BB001_MAIN_GENERIC_NC_RED52\K530_R8BB001_MAIN_GENERIC_NC_RED52.mbn
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:9200
Will flash 460 blocks...
SSW loading returns:0
Elapsed:261 secs.

Plz help mee

[Boysie]

Seems like you've done pretty much everything you can. Maybe erom problem. Think you should take to service center.

[aswinvs]

I hope its software problem on.

Thanks Boysie99 for the reply still waiting for reply ...
Any one know how to use cruiser suite to restore gdfs its asks for a file with extension gdfs

By GDFS backup file has extension .bin So what to do

[cchaos]

Never flash another GDFS to your phone (unless you have a service cable: NOT the standard cable that comes with your phone otherwise your phone WILL be dead)

[aswinvs]

I have a DCU 60 cable with me and i have my gdfs backup with me also...

[Boysie]

I have a DCU 60 cable with me and i have my gdfs backup with me also...

...which you have tried to restore and failed. I don't think you're going to fix this for free. Take it for repair.