Help With Flashing/unlocking K610i (sweden, Vodafone Branded) |
  |
Help With Flashing/unlocking K610i (sweden, Vodafone Branded) |
 2009-06-08 14:51
Post
#1
|
|
|
No Se-nse  Group: Members Posts: 59 Joined: 2008-04-10 From: Sweden Member No.: 130,905 Mobile: W660 & K750@W800  |
Hey guys, I'd like some help with flashing, unlocking, and even better if i could debrand it, a K610i.
the files i have currently: XS++ 3.1 SE-tool lite 2.11 K610_R1CE001_MAIN_VODAFONE_TH_RED52.mbn K610_R1CE001_FS_VFE_LIVE_3_RED52.fbn this cust pack: K610i_CDA102497_24_R23A_3_Sweden Now the problem is that after flashing all these, the phone works, as usual. but after patching with the .vkp SIMunlockpatchgen gives me (after feeding it the .mbn file) its dead, nothing lights up, no nothing i do believe im unsing the tools correctly, but i think something is wrong with some files? when patching i do get "some values differ" message, but i patch anyway, should i not? |
 |
 
|
|
2009-06-08 15:08
Post
#2
|
|
 Se-nse-a-holic!  Group: VIP Posts: 5,321 Joined: 2008-07-31 From: Approx. 6.8 miles down the M3 from cchaos or exactly 268 miles from Corman! :D Member No.: 164,334 Mobile: Yes. |
QUOTE (GizmoTheGreen @ 2009-06-08 15:51)  when patching i do get "some values differ" message, but i patch anyway, should i not? No you should not. Don't continue when you get a mismatch warning. -------------------- |
|
|
|
|
2009-06-08 19:56
Post
#3
|
|
|
No Se-nse Group: Members Posts: 59 Joined: 2008-04-10 From: Sweden Member No.: 130,905 Mobile: W660 & K750@W800 |
QUOTE (Boysie99 @ 2009-06-08 17:08) No you should not. Don't continue when you get a mismatch warning. okay, then what should i do, the .vkp is generated with the same firmware file that ive flashed to the K610. i dont see what ive been missing. ive followed several of the guides here both to the tools and the quick unlock guide. |
|
|
|
|
2009-06-08 20:22
Post
#4
|
|
 Philosopher  Group: SE-NSE Awards '09 Posts: 6,230 Joined: 2007-05-16 From: Apparently 268 miles from Boysie :D Member No.: 41,798 Mobile: Linda has been browned :D Tutorials Submitted: 1 |
Bizarre... Are you using the Quick Acces patch?
-------------------- |
|
|
|
|
2009-06-08 21:50
Post
#5
|
|
|
No Se-nse Group: Members Posts: 59 Joined: 2008-04-10 From: Sweden Member No.: 130,905 Mobile: W660 & K750@W800 |
QUOTE (-corman- @ 2009-06-08 22:22) Bizarre... Are you using the Quick Acces patch? no, i havent quite figured out how i apply it, is it built into se tool 2.11? i figured since this will be the only patch i just checked "bypass 2020 security" |
|
|
|
|
2009-06-08 22:05
Post
#6
|
|
 moderating the chaos on se-nse  Group: Moderators Posts: 4,558 Joined: 2007-09-11 From: N51o03'19.25", W1o19'29.42" Member No.: 66,939 Mobile: Helen: AWOL. Wilma: Patched. Linda: still RED! |
Use JD flasher to install the patches: it will be quicker.
Guide: http://forums.se-nse.net/index.php?showtopic=27775 -------------------- Downloads for w810 (and blackice accoustics for db201x) | Peters V2 acoustics (db2020 only) | Mini guide and download for flash drivers REST file guide for setool2lite | se-nse a-win lounge | Signature rules: READ THEM! My skydrive - programs, firmware and more! ^JD Flasher re-uploaded - qa2020 script fixed, BFS fixed^ Help me with this please |
|
|
|
|
2009-06-08 22:40
Post
#7
|
|
|
No Se-nse Group: Members Posts: 59 Joined: 2008-04-10 From: Sweden Member No.: 130,905 Mobile: W660 & K750@W800 |
QUOTE (cchaos @ 2009-06-09 00:05) Use JD flasher to install the patches: it will be quicker. Guide: http://forums.se-nse.net/index.php?showtopic=27775 if ive understood you right i really need the quack access patch to unlock it? i will do that now then, with se-tool, to much hassle to get far and jdflasher and tinker for something i will only do once, but thanks, i will brb with results edit: the heck, even with quick access patch generated with qamaker still some values differ, now i apply firmware and patch at same time in se-tool 2.11... this is weird 2nd edit: just to clarify im getting values differ when applying the quick access patch, while applying both main firmware and qapatch.vkp generated with qamaker at the same time in se.tool This post has been edited by GizmoTheGreen: 2009-06-08 23:15 |
|
|
|
|
2009-06-09 08:37
Post
#8
|
|
|
Se-nse-a-holic! Group: VIP Posts: 5,321 Joined: 2008-07-31 From: Approx. 6.8 miles down the M3 from cchaos or exactly 268 miles from Corman! :D Member No.: 164,334 Mobile: Yes. |
Can you post some logs please.
-------------------- |
|
|
|
|
2009-06-09 21:52
Post
#9
|
|
|
No Se-nse Group: Members Posts: 59 Joined: 2008-04-10 From: Sweden Member No.: 130,905 Mobile: W660 & K750@W800 |
QUOTE (Boysie99 @ 2009-06-09 10:37) Can you post some logs please. Here is a fresh log from se-tool 2 v1.11 steps i did: 1. select phone model (K610) 2. select firmware upgrade pack, K610_R1CE001_MAIN_VODAFONE_TH_RED52.mbn 3. select .vkp patch in MISC, quick_access_K610_R1CE001.vkp (made with qamaker by dropping the firmware file on it) 4. Press FLASH Log: CODE Welcome to SEtool2 ( LITE edition ) v 1.11 supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52 Loaded 51 flash descriptors if you like LITE edition - please visit www.setool.net and buy FULL. ChipID:9900,EMP protocol:0301 PHONE IS RED RETAIL PRODUCT FLASH CID detected:52 Speed:921600 OTP LOCKED:1 CID:49 PAF:1 IMEI:35171001297172 CERT:RED FLASH CID:52 COLOR:RED LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005 Flash ID check:897E Flash props sent ok CID52 BYPASS PROCEDURE STARTED Processing part1... CSloader version: 070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009 Processing part2... Processing part3.... OTP LOCKED:1 CID:49 PAF:1 IMEI:35171001297172 CERT:RED FLASH CID:52 COLOR:RED LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005 Flash ID check:897E Flash props sent ok REMOVE CABLE FROM PHONE REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK THEN PRESS "READY" HOLD "C" BUTTON AND ATTACH PHONE CID52 BYPASS PROCEDURE FINISHED ChipID:9900,EMP protocol:0301 PHONE IS RED RETAIL PRODUCT FLASH CID detected:52 Speed:921600 Trying to launch embedded bootloader... INT LDR:DB2020_PRELOADER_FOR_SETOOL2 LDR:DB2020 LOADER FOR SETOOL2 Flash ID check:897E Flash props sent ok Going to execute VKP script.... Starting to process VKP patch script: H:\cell tools\setool2lite\qamaker\quick_access_K610_R1CE001.vkp VKP script loaded OK. Lines: 1637 Patch structure created OK. Determining blocks to read... New block #0000 added: $44140000 New block #0001 added: $45AC0000 Blocks selected OK. Reading blocks: 2 Blocks readed to memory OK. Checking contents... (here it tells me about the differing values) Elapsed:1354 secs. (long time i know, i was reading manga, so it had to wait for me a bit to press "ready" i get the message "some values differ" in this case i choose not to continue, but if i do Result: "dead" phone, power button does nothing, zilch, nada. same rsult if i ignore and continue Reflashing main + fs + cust pack in XS++ revives it though, but ofcourse its locked, lol and i cant patch in XS++, unless ive missed something edit: log when choosing to continue anyway: CODE Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52 Loaded 51 flash descriptors if you like LITE edition - please visit www.setool.net and buy FULL. Abort all operations. phone pre-boot failed,possible RECOVERY needed. Elapsed:4 secs. ChipID:9900,EMP protocol:0301 PHONE IS RED RETAIL PRODUCT FLASH CID detected:52 Speed:921600 OTP LOCKED:1 CID:49 PAF:1 IMEI:35171001297172 CERT:RED FLASH CID:52 COLOR:RED LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005 Flash ID check:897E Flash props sent ok CID52 BYPASS PROCEDURE STARTED Processing part1... CSloader version: 070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009 Processing part2... Processing part3.... OTP LOCKED:1 CID:49 PAF:1 IMEI:35171001297172 CERT:RED FLASH CID:52 COLOR:RED LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005 Flash ID check:897E Flash props sent ok REMOVE CABLE FROM PHONE REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK THEN PRESS "READY" HOLD "C" BUTTON AND ATTACH PHONE CID52 BYPASS PROCEDURE FINISHED ChipID:9900,EMP protocol:0301 PHONE IS RED RETAIL PRODUCT FLASH CID detected:52 Speed:921600 Trying to launch embedded bootloader... INT LDR:DB2020_PRELOADER_FOR_SETOOL2 LDR:DB2020 LOADER FOR SETOOL2 Flash ID check:897E Flash props sent ok Going to execute VKP script.... Starting to process VKP patch script: H:\cell tools\setool2lite\qamaker\quick_access_K610_R1CE001.vkp VKP script loaded OK. Lines: 1637 Patch structure created OK. Determining blocks to read... New block #0000 added: $44140000 New block #0001 added: $45AC0000 Blocks selected OK. Reading blocks: 2 Blocks readed to memory OK. Checking contents... Blocks patched OK. Start writing... Block 0 written Block 1 written VKP script executed OK Elapsed:655 secs. This post has been edited by GizmoTheGreen: 2009-06-09 22:11 |
|
|
|
| SE-NSE |
|
|
|
|
|
|
|
|
2009-06-10 21:28
Post
#10
|
|
|
No Se-nse Group: Members Posts: 59 Joined: 2008-04-10 From: Sweden Member No.: 130,905 Mobile: W660 & K750@W800 |
I know what ive been doing wrong now.
your supposed to add the firmware file in the "file list" not the firmware upgrade pack field. i take it the creator of setool doesnt have english as his main language? anyway, it works flawlessly now, thanks guys |
|
|
|
|
|
Lo-Fi Version | Time is now: 2009-11-21 20:47 |
