Unlock K310i; Some Technical Details About My Mobile Phone, i don't understand some of the terms used everywhere Options

[KenyaSong]

ok, i tried to unlock my se k310i.
this is the vkp i used:

CODE

;K310 SW-R4DA044
;Remove SIM-Lock
;(c) IronMaster
;(p) simox SIM_lock_remover patch generator
+44140000
B45E48: 70B5041CACF21EFE00230022011C1C20 F0B505213A22D1F7E7FC0020F0BDC046

it asked me this at a time: some patch values differ, continue ? i chose yes
also, at this moment (DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY") i coulnd't press ready because i pull out the usb cable and connected while pressing C and the program started to write...
what should i do now? it doesn't seem to recognize another sim card ("insert correct sim card")
i have a gdfs backup. should i restore it ?
what does "RESTORATION FILE PRESENT FOR DETECTED FIRMWARE" mean ?

CODE

Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit www.setool.net and buy FULL.

Abort all operations.
Can't load ID loader !
Elapsed:25 secs.
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:35469201179364 CERT:RED
FLASH CID:49 COLOR:RED

Model:K310i
Brand:MOBIFON S.A. (Vodafone)
MAPP CXC article: R4DA044     prgCXC1250471_VODAFONE_DO
MAPP CXC version: R4DA044
Language Package:VFE_LIVE_3
CDA article: CDA102570/67
CDA version: R7A
Default article: cxc1250474
Default version: R4DA044

Network LOCKED
Operator: 226-01

USERCODE:0000

RESTORATION FILE PRESENT FOR DETECTED FIRMWARE

Elapsed:16 secs.
Going to execute VKP script....
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35469201179364 CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
Flash ID check:897E
Flash props sent ok

DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

Trying to launch embedded bootloader...
INT LDR:COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:897E
Flash props sent ok
FOUND: R4DA044_CXC1250471_VODAFONE_DO
Restore from:R4DA044_CXC1250471_VODAFONE_DO
Starting to process VKP patch script: [...]\SEK310i\sonyericsson_unlock.vkp
VKP script loaded OK. Lines: 6
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44C80000
Blocks selected OK. Reading blocks: 1
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...
Block 0 written
VKP script executed OK
Elapsed:178 secs.

This post has been edited by KenyaSong: 2008-07-01 13:57

[steadyontherem8]

Just try unlocking it again.

[KenyaSong]

well, i thought about that but i was afraid something bad could happen
so i'll try again without restoring the gdfs first.

thanks

[KenyaSong]

sorry for double posting.
i tried again. it is the same thing

are those red lines correct ? why is it saying "skipping" ? i read some logs from some other unlocks :D and they are much longer (+200seconds)
is it possible that my vkp isn't correct ?

CODE

Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit www.setool.net and buy FULL.

Going to execute VKP script....
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35469201179364 CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
LDR:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
Flash ID check:897E
Flash props sent ok

DETACH CABLE FROM PHONE.
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

Trying to launch embedded bootloader...
INT LDR:COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:897E
Flash props sent ok
FOUND: R4DA044_CXC1250471_VODAFONE_DO
Restore from:R4DA044_CXC1250471_VODAFONE_DO
Starting to process VKP patch script: D:\Liviu\SEK310i\sonyericsson_unlock.vkp
VKP script loaded OK. Lines: 6
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44C80000
Blocks selected OK. Reading blocks: 1
Blocks readed to memory OK. Checking contents...
Blocks patched OK. Start writing...

block already patched, skipping.

CODE

VKP script executed OK

Elapsed:50 secs.

[KenyaSong]

ok, problem solved with this vkp, generated with patch generator by simox.
thank you to all who wrote all these programs.

CODE

;K310 SW-R4DA044
;Remove SIM-Lock
;(c) IronMaster
;(p) simox SIM_lock_remover patch generator v2.1
+44140000
B070A0: 70B5041CCDF27EFC00230022011C1C20 F0B505213A22D1F7C7FC0020F0BDC046

merge my posts please, or delete them

This post has been edited by KenyaSong: 2008-07-02 17:25

[Wally_Dog]

It only said blocks patched, skipping because you had already patched those memory addresses, therefore it did not have to write any values there.