W300i Dead After Flashing, Help me Please! Options

[deadw300i]

Hi there. This is my 1st post on this forum and I wasnt sure where to ask for help. Im dying (literaly) after I flash my w300i trying to get that fashioned and great looking flash lite menus.
I was following the instructions step by step until I flash the phone with XS++ version 3.1.

I got a screen like this (this one is taken from the tutorial)

I use w300_p3k_dcu.49R.ssw to flash it (this file is included on db2010cid49_4_alpha.rar.zip.

And I wait +60 seconds until I decide to STOP the process. The tutorial said "It's only 5 flash blocks, should not take more than 30secs. Just choose STOP if it hangs on 100%.". After that I wait 5 seconds and try to turn on my phone. And now NEVER turns on.
I wanna die right here right now, because I need this phone so bad.
PLEASE someone help me with this one. I dont know what to do

[93bh]

It happened to my w810i. You just reflash the main.
Are you trying to make it work with SEFP (Far)?

[deadw300i]

It happened to my w810i. You just reflash the main.
Are you trying to make it work with SEFP (Far)?

Before at all Thanks 93bh for your fast answer.
Nope, Im not using far, just XS++ version 3.1.
And I did reflash with w300_p3k_dcu.49r.ssw
This is what I get


22:00:34| TURN OFF PHONE!
22:00:34| Hold 'C' button on phone and connect phone NOW.
22:00:34| You have 30 seconds...
22:00:34|
22:00:34| Baseband ID: 8040
22:00:34| Protocol Version: 3.1
22:00:34|
22:00:34| Sending db2010_cid00_prodid_p3l.bin...
22:00:34| Applet ID: 061113 1250 ALUCXC125872_COMPACTPRODUCTION_ID_LOADER P3L
22:00:34| This is a PRODUCTION_ID loader
22:00:34| Activating GDFS...
22:00:35| Phone name detected!
22:00:35|
22:00:35| Profiling SEMC phone...
22:00:35| Platform: DB2010
22:00:35| OTP CID: 49
22:00:35| EROM CID: 49
22:00:35| EROM Color: Red
22:00:35| IMEI: 364202801xxxxxx
22:00:35| Phone ID: W300
22:00:35| Region: AMERICA_2
22:00:35| CDA: CDA102499/81 R4A
22:00:35| Firmware Version: R9A036
22:00:35| EROM: n/a
22:00:35| Ready for operation!
22:00:52|
22:00:52| Sending db2010_cid49red_flash_r2a003.bin...
22:00:52| Applet ID: 060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
22:00:52| This is a FLASH loader
22:00:52| Now flashing firmware main...
22:00:52| Flashing j:\download\w300_p3k_dcu.49r.ssw
22:00:52| Header type: BABE
22:00:52| 5 flashblocks
22:00:54| Finishing flash

When is finishing stay in there and never leaves. I wonder what Im doing wrong.

[93bh]

So why are you flashing that .ssw? What are you going to do with this?

Just forget that file!

[deadw300i]

So why are you flashing that .ssw? What are you going to do with this?

Just forget that file!

Im doing this because the tutorial said so

7. Open XS++, connect, ONLY flash your MAIN with w810_p3k_dcu.49R.ssw for W810i or use w300_p3k_dcu.49R.ssw for W300i (located in CID49 package).

Now Im going to try with the main firmware

W300i_R9A036_MAIN_GENERIC_JE_RED49.mbn

Thanks again 93bh!

EDIT

I flash the phone with that firmware and now tell me "Insert Correct SIM card" ?
oh God!. Did I screw even more everything?

This post has been edited by deadw300i: 2008-04-14 02:04

[Ciggy]

you'll need to unlock the phone. you can use a patch to do this. look Here

[deadw300i]

I think I just screw the things even more. DAMMIT. I dont know to cry or jump into the window.
After the last firmware update/write/etc I did everything by the book and when I turn the phone on, it show a black screen and then white and then back to black and so on... Now "flash" all the time :`(
I dont know what to do now... This all happend because I want to have a good lookin menu and now I dont have phone AT ALL

Thanks Ciggy and I hope someone show me a light of hope on this.

[Ciggy]

do you have a GDFS backup?

[deadw300i]

yes Ciggy. But I did (backup) this after the phone do this hangs. So, I dont know if is valid or not.
Thanks for your reply

[Ciggy]

umm try flashing your firmware. main + fs and custpack. if not try SEUS. you should've done the backup first.

[deadw300i]

umm try flashing your firmware. main + fs and custpack. if not try SEUS. you should've done the backup first.

Could you please tell me where can I find this custom pack?.
Yes, and you are right, I should backup this before all but I didnt know it that this will end in this way. More, the tutorial say nothing about backup anything (!!).

If I sort this out, I PROMISE I will make a tutorial on this. And explain step by step my experience.

[deadw300i]

Btw all the files I have (related with the firmware) are:

W300i_R9A036_MAIN_GENERIC_JE_RED49.mbn (from the tutorial)

gdfs_(IMEI).bin (backup AFTER the catastrophe and never pointed by any tutorial)

Nothing more.

[steadyontherem8]

Go to customize file system and choose your W300 and Europe3 for your custom pack and whether you want debranded firmware. Unless you are a member at topsony and have posted 20 good posts and been a member for a month (i think), you can't download and topsony is the only place that has W300_R9A036_FS_EUROPE_3_RED49 which is what you need.

[deadw300i]

Im not in europe, that would work with me?. That would make my phone back?
I never have uploaded any FS to my phone, btw. Why would I do that?.

Thanks for your answer steadyontherem8.

EDIT

Access to area of downloading only after 2 registered month and with 20 messages.

Their site, their rules. But 2 months?. Come on.

btw

Go to customize file system and choose your W300 and Europe3 for your custom pack and whether you want debranded firmware.

Where is that?. With what?

This post has been edited by deadw300i: 2008-04-14 20:36

[Ciggy]

check iprotebe.cz or www.4shared.com

[deadw300i]

Thanks again Ciggy!. I will try with that. And post here what was the result.

[93bh]

You're welcome, mate!

Why did you put your name "deadw300i"?

[deadw300i]

well... I have downloaded the file w300_r4ea031_fs_america_2_red49 (because my cellphone is/was America_2) and Reflash the phone with everything I have, meaning:
W300i_R9A036_MAIN_GENERIC_JE_RED49.mbn
and
W300i_R9A036_FS_AMERICA_2_RED49.fbn

Now I have a screen that dont move saying "Please Wait". Was like this for several minutes without moving the bar. Is stucked on the 1/3 and doesnt move.
I have tried with
W300_R9A031_MAIN_GENERIC_JE_RED49.mbn
and
W300_R9A031_FS_AMERICA_2_RED49.fbn

The with the same result.
Sorry to bother you guys, I appreciate all the help and time you spend with me. Have been about 20 hours since I start trying to recover my phone, reading and reading several threads from several places and with no results. I cant find the way to sort this out and less alone.

Thanks again to Ciggy

[deadw300i]

You're welcome, mate!

Why did you put your name "deadw300i"?

because thats the way my cellphone is and might be

Thanks to you too 93bh

[Ciggy]

there's this patch for W810. if someone could port it for your firmware, that would be great. i don't have the necessary tools i need and knowledge to port it, sorry.

CODE

;W810 SW-R4EA031
;Use Phone without finalisation,REMOVE OTP <-> GDFS checking, Please Wait problem
;,Remove SIM-Lock
;©GVELF aka Kaa,-=Masoud57=-,IronMaster
;(p) Joker777 (Use Phone without finalisation)
44FCB6BE: 08D1 C046
451D1A9E: 8AB0041C 012070BD
44E52918: 70B5041CF1F2C4F900230022011C1C20 F0B505213A22D1F71FFD0020F0BDC046