Dead K610i Options

[se guy94]

I try to switch my k610i on and it there just a red light at the top flashing any one know whats wrong?
please help

[mousex]

Hey, a really noobish thing happenend to me. I made a full backup of my sisters K610i and flashed it to W660i, everything worked. But she wanted her K610 back and I flashed a backup. Problem is, it was my K800 backup. And I have no GDFS backup from the K610i, I hope the GDFS is in my full backup (start address 44140000 lenght 92MB).
Setool lite detects the K610 as a K800 and I can't write back the full backup because I can't apply the quick access patch. Can anybody tell me how to get the raw image of the gdfs out of the full backup? I don't know at which address it is for db2020 K610.
Flashing MAIN and FS works fine. But phone doesn't start, just the red LED blinks. Using bypass db2020 security hangs at step3. JDflasher doesn't detect the phone.
All actions using settol lite only work when connecting with 2+5 instead of c.
So, if anybody can tell me the address and lenght of the GDFS for k610 that would be awesome. So that I can cut the GDFS from the full backup and flash it back without the rest.

[Corman]

Isn't a red blinking light a sign of a corrupted EROM?

[mousex]

I updated the EROM with kk client, so I though this is not the problem. Its not the IRDA led which is blinking, it's the red led on top of the mobile. I know that it has the wrong gdfs as it's detected as K800, I need the start address of GDFS for K610

[se guy94]

its the top thing how do yu fix the erom

[Corman]

Follow Number1's tutorial on how to fix EROMs :
http://forums.se-nse.net/index.php?showtopic=19840&hl=

[se guy94]

i read that setool dont detect my phone

[se guy94]

or xs

[se guy94]

this is what it says on xs
19:12:13| Hold 'C' button on phone and connect phone NOW.
19:12:13| You have 30 seconds...
19:12:13|
19:12:46| Error: Cannot open phone communication port
19:12:48| Disconnected... Unplug the phone

[number1]

Hey, a really noobish thing happenend to me. I made a full backup of my sisters K610i and flashed it to W660i, everything worked. But she wanted her K610 back and I flashed a backup. Problem is, it was my K800 backup. And I have no GDFS backup from the K610i, I hope the GDFS is in my full backup (start address 44140000 lenght 92MB).
Setool lite detects the K610 as a K800 and I can't write back the full backup because I can't apply the quick access patch. Can anybody tell me how to get the raw image of the gdfs out of the full backup? I don't know at which address it is for db2020 K610.
Flashing MAIN and FS works fine. But phone doesn't start, just the red LED blinks. Using bypass db2020 security hangs at step3. JDflasher doesn't detect the phone.
All actions using settol lite only work when connecting with 2+5 instead of c.
So, if anybody can tell me the address and lenght of the GDFS for k610 that would be awesome. So that I can cut the GDFS from the full backup and flash it back without the rest.

you don't need to bypass db2020 security or use a quick access patch when writing back to the phone i assume the back-up is a .ssw file, so stick it in the files box and press flash

[mousex]

the problem is, that it's an bin file (didn't tick "read ssw) and I can't add it to flash files.
Repairing the erom doesn't work

CODE

ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:3517100xxxxxxxx CERT:N/A
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
CSloader version:
070410 1557 HANCXC1250562_DB2020_CSLOADER_R3A009
loader startup: executed
loader GDFS startup: executed
smth wrong with usercode reset,error is: 1
Elapsed:26 secs.

Can nobody tell me where GDFS is located on the phone (which address?)

This is the log when I identify the K610, it says K800, so I guess as I flashed accidently the K800 backup it also flashed the K800 GDFS and I can'T flash back the K610 backup, so I want to exttract the GDFS from the full backup:

CODE

Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit www.setool.net and buy FULL.

ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:3517100xxxxxxx CERT:N/A
FLASH CID:52 COLOR:RED
IMEI MISMATCH ! GDFS IMEI:3547160xxxxxxx

Model:K800i
MAPP CXC article: R8BF003     prgCXC1250210_GENERIC_WI
MAPP CXC version: R8BF003
Language Package:EUROPE_2
CDA article: CDA102511/4
CDA version: R7A
Default article: cxc1250490
Default version: R8BF003

Operator: 000-00

Elapsed:8 secs.

This post has been edited by mousex: 2008-03-17 23:13

[karlingen]

this is what it says on xs
19:12:13| Hold 'C' button on phone and connect phone NOW.
19:12:13| You have 30 seconds...
19:12:13|
19:12:46| Error: Cannot open phone communication port
19:12:48| Disconnected... Unplug the phone

You need the correct drivers

[mousex]

Is it possible to flash the GDFS from my other K610 to my sisters K610 to get it detected by JDflasher so that I can flash my full backup in bin format? Setool lite won't flash this bin Backup, only ssw, mbn and fbn.

[milad_a]

hi

only way is restore GDFS i see such problem for my K610i and i put my backup GDFS and it work very well

[bigpipo]

You cant get the gdfs from full backup,.also ıts not gdfs error,try to flash db2020 w580 maın,and than connect to setol,, ıt wıll read it as w580,

The problem ıs erom,,if its burned you cant repair it by dcu 60,,, you can do it with ufs com port cable and original setol or cruiser programme,,you must pay for this,you can send it to guarante,its the only way,for more info visit cruiser site...