Most Easy Tutorial for K750i >> W800, Do it in Style Options

[Rana Bose]

Disclaimer : This process is 100% safe, but I am not to be held responsible if anything at all happens. Read other tutorials available on the net before starting

Tried flashing with FAR+SEFP then try this. Even something happens to the phone do not worry u can always flash back. That’s what I found with my experimentation.
So let’s start. U can always flash back to K750 if u have the right firmware.

W800 has types CID36 only, but K750 is available in two CID36 & CID49
Remove SIM and memory card for the entire procedure.
Watch keenly on the messages shown in the software window (XS++).
Do not let your phone turn ON at any point of time. Flashing takes place only when phone is switched OFF. U will see ur CID urself don’t worry now.
** If you have all drivers installed and your cell is CID 36, start from STEP4 anf follow step 5 & 6.

Before u start
1. A phone needs two things FLASH and MAIN. These are the operating system for ur phone. The files for any of the models can be found from www.topsony.com. But u need registration. The FLASH file will be something like W800_R1BC002_FS_EMEA6.bin and MAIN something like W800_R1BC002_MAIN_EU_EMEA.bin.
2. EMEA indicates the software type and the above supports for India tested by myself. For others u will have to download others like (W800_R1BC002_MAIN_EU_EMEA_RED49 & W800_R1BC002_FS_EMEA2)
3. W800 stands for the mobile model for which the software is and R1BC002 is the type of FIRMWARE (Something like software version).
4. Full package can be found at http://rapidshare.com/files/12706205...oW800.rar.html
5. or search for this file at www.4shared.com “K750toW800” it also contains the full package. I have used this its free.

Here is the link: http://www.4shared.com/file/18058082/853c8...toW800.html?s=1

Unpack the rar file using WinRAR.

The package includes:

XS++: This program is used to flash you phone’s firmware. This also lets you check your CID number.

Gslide: This program converts W800 CID36 firmware to CID49, to make the firmware compatible to K750 CID49 phones. CID36 users need not use this.

W800 Firmware: Your Main and File System files. Your W800’s operating system files.

USB Flash Driver: The driver you need to enable your phone for flashing through USB cable. These drivers are NOT (I repeat NOT) the same ones you get on K750 PC suite CD



Flashing should be done in this order
1) Flash FS
2) Customize FS
3) Flash MAIN
Because in XS++ the flashing has to be done in following order only because of a bug.



STEP1: Installing USB Flash Driver.

Turn off your phone. Remove SIM and memory card, and re-insert battery. Do not turn ON.

Inside K750toW800 folder, goto XS++ folder and open the program. now click START. While pressing and holding the ‘c’ button on your phone’s keypad, insert USB cable. Windows will detect a new hardware and ‘Install new hardware’ wizard pops up. Release the ‘c’ button. In the wizard, click ‘no, not at this time’ and next. Choose to install from a specified location and click next. Under ‘search for the best drivers to install’, check ‘include this location in the search’. Under ‘browse’, choose the path to the unpacked folder you downloaded and select the folder USB Flash Driver. Now click next and let the windows install the driver.

After installing the driver, close XS++ and disconnect phone and turn it off in case it has switched on. Remove battery for 2 seconds and re-insert it (to refresh your phone). (Removing and re-inserting is usually required once u disconnect in any step)
Now your phone is ready to be flashed.

CHECKING CID NUMBER

Again open XS++, click START, and insert cable while pressing ‘c’ the same way as before. Your fone gets detected and on the left side of the screen, you get the detailed info of your phone including the EROM CID number.

If you have CID 36, then goto STEP2 and go directly to STEP3. Do not close XS++ or unplug your fone.

STEP2:

Now, you know you have a CID49. So the CID36 firmware has to be converted to CID49.
A. Open Gslide. for flashfile, click ‘…’ and select the file named ‘W800_R1BC002_MAIN_EU_EMEA.bin’ inside the W800 Firmware folder. Inside ‘output’ type in the path… C:\MAINFLASH.bin. Now click ‘Process’.

B. After sliding process is completed, again click ‘…’ for flashfile and select file ‘W800_R1BC002_FS_EMEA6.bin’ inside the same folder. Under output type in C:\FSFLASH.bin and hit process. Close the whole program after sliding completes.

Now there will be 2 files in C:\ drive using Gslide. MAINFLASH.bin and FSFLASH.bin

STEP3: Flashing FS.

• For CID36: Your phone is already detected by XS++. Under Select Firmware, check Flash File System, and then click ’…’ , now select the file ‘W800_R1BC002_FS_EMEA6.bin’ inside W800 Firmware folder. Hit flash… the flashing process is now initiated. After completion of 291 blocks, it will say either ‘done flashing’ or hang at ‘finishing flash’. Don’t worry about it. Close the program and unplug phone. Again take-out and reinsert battery to refresh. Goto STEP4.

• For CID49: Inside XS++, Under Select Firmware, check Flash File System, and then click ’…’ , now select the file ‘FSFLASH.bin’ in the C:\ drive which we generated from Gslide. Hit flash to start flashing process. After completion of 291 blocks, it will say either ‘done flashing’ or hang at ‘finishing flash’. Don’t worry about it. Close the program and unplug phone. Again take-out and reinsert battery to refresh.

STEP4: Customizing FS.

Common for CID36 and CID49: Again open XS++ and connect the phone same way as we did before. Now check Customize File System and then select phone model ‘W800’, select CDA and region ‘EMEA_6(CDA102430/6)’. Hit Flash. It will ask you whether you want to use ‘breakin’ or ‘brute-force’. Click ‘yes’ for breakin and strictly follow instructions on the left side of the screen. It will ask you to connect and re-connect phone 2-3 times by press and hold ‘c’ method. Do not panic at any point here, just follow the instructions carefully on the left. At the point when it says ‘FS activation’, wait for 3 minutes. After completion, close XS++ and unplug fone. Refresh by re-inserting battery.

STEP5: Flashing MAIN.

• For CID36: Open XS++ and again connect your phone the same way. Under Select Firmware, check Flash Main, and then click ’…’ , now select the file ‘W800_R1BC002_MAIN_EU_EMEA.bin’ inside W800 Firmware folder. Hit flash… the flashing process is now initiated. After completion of 291 blocks, it will say either ‘done flashing’ or hang at ‘finishing flash’. Unplug your phone and close XS++.

• For CID49: Open XS++ and again connect your phone the same way. Under Select Firmware, check Flash Main, and then click ’…’ , now select the file ‘MAINFLASH.bin’ in the C:\ drive which we generated from Gslide. Hit flash… the flashing process is now initiated. After completion of 291 blocks, it will say either ‘done flashing’ or hang at ‘finishing flash’. Unplug your phone and close XS++.

STEP6: Final steps

Now, insert your SIM and memory card and turn on the phone, wait for sometime as the phone takes time loading from a brand new firmware. It will say phone staring don’t panic it will take some time as the new software has to be initiated.

NOTE: EU4 files won’t work in India the phone flashes fine and starts but the network is not detected. It says configuration error. As far as I know EMEA6 is needed in India. For other countries a little search can be done.

ADAPTED FROM http://www.orkut.com/CommMsgs.aspx?c...24677429075272
Written after I FLASHED MY K750i to W800i
BY RADIX

This post has been edited by Rana Bose: 2007-07-16 11:24

[lewson]

good guide, i flashed by this once i plucked up the courage just a note to any 1 that reads this its easier than it looks

This post has been edited by lewson: 2007-07-22 08:59

[j9stl]

Thanks Rana - I have a question please.
Can these same two files (main and fs quoted in the tutorial and after using the gslide process) be used for a UK based K750 CID 49 RED phone?
Do i need specific UK files for UK networks?
If so, will this also unlock my phone to any network sim as a added bonus of flashing?

[bimasakti85]

Thanks Rana - I have a question please.
Can these same two files (main and fs quoted in the tutorial and after using the gslide process) be used for a UK based K750 CID 49 RED phone?
Do i need specific UK files for UK networks?
If so, will this also unlock my phone to any network sim as a added bonus of flashing?

Those method arent for unlocking. Unlocking requires service cable, etc. Search the forum for unlocking.

[j9stl]

Those method arent for unlocking. Unlocking requires service cable, etc. Search the forum for unlocking.

You missed my point. If I use generic european or generic UK Main & fs files to flash, then how could the phone be locked to a network afterwards?
Surely this would leave the phone as a W800 for any UK networks?

[dudura]

good guide really

[killa12222]

Disclaimer : This process is 100% safe, but I am not to be held responsible if anything at all happens. Read other tutorials available on the net before starting

Tried flashing with FAR+SEFP then try this. Even something happens to the phone do not worry u can always flash back. That’s what I found with my experimentation.
So let’s start. U can always flash back to K750 if u have the right firmware.

W800 has types CID36 only, but K750 is available in two CID36 & CID49
Remove SIM and memory card for the entire procedure.
Watch keenly on the messages shown in the software window (XS++).
Do not let your phone turn ON at any point of time. Flashing takes place only when phone is switched OFF. U will see ur CID urself don’t worry now.
** If you have all drivers installed and your cell is CID 36, start from STEP4 anf follow step 5 & 6.

Before u start
1. A phone needs two things FLASH and MAIN. These are the operating system for ur phone. The files for any of the models can be found from www.topsony.com. But u need registration. The FLASH file will be something like W800_R1BC002_FS_EMEA6.bin and MAIN something like W800_R1BC002_MAIN_EU_EMEA.bin.
2. EMEA indicates the software type and the above supports for India tested by myself. For others u will have to download others like (W800_R1BC002_MAIN_EU_EMEA_RED49 & W800_R1BC002_FS_EMEA2)
3. W800 stands for the mobile model for which the software is and R1BC002 is the type of FIRMWARE (Something like software version).
4. Full package can be found at http://rapidshare.com/files/12706205...oW800.rar.html
5. or search for this file at www.4shared.com “K750toW800” it also contains the full package. I have used this its free.

Here is the link: http://www.4shared.com/file/18058082/853c8...toW800.html?s=1

Unpack the rar file using WinRAR.

The package includes:

XS++: This program is used to flash you phone’s firmware. This also lets you check your CID number.

Gslide: This program converts W800 CID36 firmware to CID49, to make the firmware compatible to K750 CID49 phones. CID36 users need not use this.

W800 Firmware: Your Main and File System files. Your W800’s operating system files.

USB Flash Driver: The driver you need to enable your phone for flashing through USB cable. These drivers are NOT (I repeat NOT) the same ones you get on K750 PC suite CD
Flashing should be done in this order
1) Flash FS
2) Customize FS
3) Flash MAIN
Because in XS++ the flashing has to be done in following order only because of a bug.
STEP1: Installing USB Flash Driver.

Turn off your phone. Remove SIM and memory card, and re-insert battery. Do not turn ON.

Inside K750toW800 folder, goto XS++ folder and open the program. now click START. While pressing and holding the ‘c’ button on your phone’s keypad, insert USB cable. Windows will detect a new hardware and ‘Install new hardware’ wizard pops up. Release the ‘c’ button. In the wizard, click ‘no, not at this time’ and next. Choose to install from a specified location and click next. Under ‘search for the best drivers to install’, check ‘include this location in the search’. Under ‘browse’, choose the path to the unpacked folder you downloaded and select the folder USB Flash Driver. Now click next and let the windows install the driver.

After installing the driver, close XS++ and disconnect phone and turn it off in case it has switched on. Remove battery for 2 seconds and re-insert it (to refresh your phone). (Removing and re-inserting is usually required once u disconnect in any step)
Now your phone is ready to be flashed.

CHECKING CID NUMBER

Again open XS++, click START, and insert cable while pressing ‘c’ the same way as before. Your fone gets detected and on the left side of the screen, you get the detailed info of your phone including the EROM CID number.

If you have CID 36, then goto STEP2 and go directly to STEP3. Do not close XS++ or unplug your fone.

STEP2:

Now, you know you have a CID49. So the CID36 firmware has to be converted to CID49.
A. Open Gslide. for flashfile, click ‘…’ and select the file named ‘W800_R1BC002_MAIN_EU_EMEA.bin’ inside the W800 Firmware folder. Inside ‘output’ type in the path… C:\MAINFLASH.bin. Now click ‘Process’.

B. After sliding process is completed, again click ‘…’ for flashfile and select file ‘W800_R1BC002_FS_EMEA6.bin’ inside the same folder. Under output type in C:\FSFLASH.bin and hit process. Close the whole program after sliding completes.

Now there will be 2 files in C:\ drive using Gslide. MAINFLASH.bin and FSFLASH.bin

STEP3: Flashing FS.

• For CID36: Your phone is already detected by XS++. Under Select Firmware, check Flash File System, and then click ’…’ , now select the file ‘W800_R1BC002_FS_EMEA6.bin’ inside W800 Firmware folder. Hit flash… the flashing process is now initiated. After completion of 291 blocks, it will say either ‘done flashing’ or hang at ‘finishing flash’. Don’t worry about it. Close the program and unplug phone. Again take-out and reinsert battery to refresh. Goto STEP4.

• For CID49: Inside XS++, Under Select Firmware, check Flash File System, and then click ’…’ , now select the file ‘FSFLASH.bin’ in the C:\ drive which we generated from Gslide. Hit flash to start flashing process. After completion of 291 blocks, it will say either ‘done flashing’ or hang at ‘finishing flash’. Don’t worry about it. Close the program and unplug phone. Again take-out and reinsert battery to refresh.

STEP4: Customizing FS.

Common for CID36 and CID49: Again open XS++ and connect the phone same way as we did before. Now check Customize File System and then select phone model ‘W800’, select CDA and region ‘EMEA_6(CDA102430/6)’. Hit Flash. It will ask you whether you want to use ‘breakin’ or ‘brute-force’. Click ‘yes’ for breakin and strictly follow instructions on the left side of the screen. It will ask you to connect and re-connect phone 2-3 times by press and hold ‘c’ method. Do not panic at any point here, just follow the instructions carefully on the left. At the point when it says ‘FS activation’, wait for 3 minutes. After completion, close XS++ and unplug fone. Refresh by re-inserting battery.

STEP5: Flashing MAIN.

• For CID36: Open XS++ and again connect your phone the same way. Under Select Firmware, check Flash Main, and then click ’…’ , now select the file ‘W800_R1BC002_MAIN_EU_EMEA.bin’ inside W800 Firmware folder. Hit flash… the flashing process is now initiated. After completion of 291 blocks, it will say either ‘done flashing’ or hang at ‘finishing flash’. Unplug your phone and close XS++.

• For CID49: Open XS++ and again connect your phone the same way. Under Select Firmware, check Flash Main, and then click ’…’ , now select the file ‘MAINFLASH.bin’ in the C:\ drive which we generated from Gslide. Hit flash… the flashing process is now initiated. After completion of 291 blocks, it will say either ‘done flashing’ or hang at ‘finishing flash’. Unplug your phone and close XS++.

STEP6: Final steps

Now, insert your SIM and memory card and turn on the phone, wait for sometime as the phone takes time loading from a brand new firmware. It will say phone staring don’t panic it will take some time as the new software has to be initiated.

NOTE: EU4 files won’t work in India the phone flashes fine and starts but the network is not detected. It says configuration error. As far as I know EMEA6 is needed in India. For other countries a little search can be done.

ADAPTED FROM http://www.orkut.com/CommMsgs.aspx?c...24677429075272
Written after I FLASHED MY K750i to W800i
BY RADIX

If like you have a firmware for India, will the customizing FS change the region of the FS to like Australia??? Or is it possible to go sim free????? PLZZZZ REPLY ASAP!!!! I REALLLLLLY want W800i !!!!!!!!

[mohits143]

If like you have a firmware for India, will the customizing FS change the region of the FS to like Australia??? Or is it possible to go sim free????? PLZZZZ REPLY ASAP!!!! I REALLLLLLY want W800i !!!!!!!!

well customizing cant b done with all of d countries.like it depends on what ur operator supports..u jusr follow the steps ul come to know. no ned to worry..
but try n keep d customization same...
as far as u wanting to go sim free tht can b done with the help of patches after u flash ur fone.
so go ahead bro..
tc
Mohit

[killa12222]

Disclaimer : This process is 100% safe, but I am not to be held responsible if anything at all happens. Read other tutorials available on the net before starting

Tried flashing with FAR+SEFP then try this. Even something happens to the phone do not worry u can always flash back. That’s what I found with my experimentation.
So let’s start. U can always flash back to K750 if u have the right firmware.

W800 has types CID36 only, but K750 is available in two CID36 & CID49
Remove SIM and memory card for the entire procedure.
Watch keenly on the messages shown in the software window (XS++).
Do not let your phone turn ON at any point of time. Flashing takes place only when phone is switched OFF. U will see ur CID urself don’t worry now.
** If you have all drivers installed and your cell is CID 36, start from STEP4 anf follow step 5 & 6.

Before u start
1. A phone needs two things FLASH and MAIN. These are the operating system for ur phone. The files for any of the models can be found from www.topsony.com. But u need registration. The FLASH file will be something like W800_R1BC002_FS_EMEA6.bin and MAIN something like W800_R1BC002_MAIN_EU_EMEA.bin.
2. EMEA indicates the software type and the above supports for India tested by myself. For others u will have to download others like (W800_R1BC002_MAIN_EU_EMEA_RED49 & W800_R1BC002_FS_EMEA2)
3. W800 stands for the mobile model for which the software is and R1BC002 is the type of FIRMWARE (Something like software version).
4. Full package can be found at http://rapidshare.com/files/12706205...oW800.rar.html
5. or search for this file at www.4shared.com “K750toW800” it also contains the full package. I have used this its free.

Here is the link: http://www.4shared.com/file/18058082/853c8...toW800.html?s=1

Unpack the rar file using WinRAR.

The package includes:

XS++: This program is used to flash you phone’s firmware. This also lets you check your CID number.

Gslide: This program converts W800 CID36 firmware to CID49, to make the firmware compatible to K750 CID49 phones. CID36 users need not use this.

W800 Firmware: Your Main and File System files. Your W800’s operating system files.

USB Flash Driver: The driver you need to enable your phone for flashing through USB cable. These drivers are NOT (I repeat NOT) the same ones you get on K750 PC suite CD
Flashing should be done in this order
1) Flash FS
2) Customize FS
3) Flash MAIN
Because in XS++ the flashing has to be done in following order only because of a bug.
STEP1: Installing USB Flash Driver.

Turn off your phone. Remove SIM and memory card, and re-insert battery. Do not turn ON.

Inside K750toW800 folder, goto XS++ folder and open the program. now click START. While pressing and holding the ‘c’ button on your phone’s keypad, insert USB cable. Windows will detect a new hardware and ‘Install new hardware’ wizard pops up. Release the ‘c’ button. In the wizard, click ‘no, not at this time’ and next. Choose to install from a specified location and click next. Under ‘search for the best drivers to install’, check ‘include this location in the search’. Under ‘browse’, choose the path to the unpacked folder you downloaded and select the folder USB Flash Driver. Now click next and let the windows install the driver.

After installing the driver, close XS++ and disconnect phone and turn it off in case it has switched on. Remove battery for 2 seconds and re-insert it (to refresh your phone). (Removing and re-inserting is usually required once u disconnect in any step)
Now your phone is ready to be flashed.

CHECKING CID NUMBER

Again open XS++, click START, and insert cable while pressing ‘c’ the same way as before. Your fone gets detected and on the left side of the screen, you get the detailed info of your phone including the EROM CID number.

If you have CID 36, then goto STEP2 and go directly to STEP3. Do not close XS++ or unplug your fone.

STEP2:

Now, you know you have a CID49. So the CID36 firmware has to be converted to CID49.
A. Open Gslide. for flashfile, click ‘…’ and select the file named ‘W800_R1BC002_MAIN_EU_EMEA.bin’ inside the W800 Firmware folder. Inside ‘output’ type in the path… C:\MAINFLASH.bin. Now click ‘Process’.

B. After sliding process is completed, again click ‘…’ for flashfile and select file ‘W800_R1BC002_FS_EMEA6.bin’ inside the same folder. Under output type in C:\FSFLASH.bin and hit process. Close the whole program after sliding completes.

Now there will be 2 files in C:\ drive using Gslide. MAINFLASH.bin and FSFLASH.bin

STEP3: Flashing FS.

• For CID36: Your phone is already detected by XS++. Under Select Firmware, check Flash File System, and then click ’…’ , now select the file ‘W800_R1BC002_FS_EMEA6.bin’ inside W800 Firmware folder. Hit flash… the flashing process is now initiated. After completion of 291 blocks, it will say either ‘done flashing’ or hang at ‘finishing flash’. Don’t worry about it. Close the program and unplug phone. Again take-out and reinsert battery to refresh. Goto STEP4.

• For CID49: Inside XS++, Under Select Firmware, check Flash File System, and then click ’…’ , now select the file ‘FSFLASH.bin’ in the C:\ drive which we generated from Gslide. Hit flash to start flashing process. After completion of 291 blocks, it will say either ‘done flashing’ or hang at ‘finishing flash’. Don’t worry about it. Close the program and unplug phone. Again take-out and reinsert battery to refresh.

STEP4: Customizing FS.

Common for CID36 and CID49: Again open XS++ and connect the phone same way as we did before. Now check Customize File System and then select phone model ‘W800’, select CDA and region ‘EMEA_6(CDA102430/6)’. Hit Flash. It will ask you whether you want to use ‘breakin’ or ‘brute-force’. Click ‘yes’ for breakin and strictly follow instructions on the left side of the screen. It will ask you to connect and re-connect phone 2-3 times by press and hold ‘c’ method. Do not panic at any point here, just follow the instructions carefully on the left. At the point when it says ‘FS activation’, wait for 3 minutes. After completion, close XS++ and unplug fone. Refresh by re-inserting battery.

STEP5: Flashing MAIN.

• For CID36: Open XS++ and again connect your phone the same way. Under Select Firmware, check Flash Main, and then click ’…’ , now select the file ‘W800_R1BC002_MAIN_EU_EMEA.bin’ inside W800 Firmware folder. Hit flash… the flashing process is now initiated. After completion of 291 blocks, it will say either ‘done flashing’ or hang at ‘finishing flash’. Unplug your phone and close XS++.

• For CID49: Open XS++ and again connect your phone the same way. Under Select Firmware, check Flash Main, and then click ’…’ , now select the file ‘MAINFLASH.bin’ in the C:\ drive which we generated from Gslide. Hit flash… the flashing process is now initiated. After completion of 291 blocks, it will say either ‘done flashing’ or hang at ‘finishing flash’. Unplug your phone and close XS++.

STEP6: Final steps

Now, insert your SIM and memory card and turn on the phone, wait for sometime as the phone takes time loading from a brand new firmware. It will say phone staring don’t panic it will take some time as the new software has to be initiated.

NOTE: EU4 files won’t work in India the phone flashes fine and starts but the network is not detected. It says configuration error. As far as I know EMEA6 is needed in India. For other countries a little search can be done.

ADAPTED FROM http://www.orkut.com/CommMsgs.aspx?c...24677429075272
Written after I FLASHED MY K750i to W800i
BY RADIX

Yessssssssssssssssssss!!!!!!!!!!!!!!!!!!! I flashed it !!!!!!!!! Thanks MAnnnnnnnnnn!!!!!! BTW I'm only 13 Years old!!! YESSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[Bruin]

Good tutorial, it works for me! Is there also a way to remove the simlock with the standard dcu-60 cable?
(k750, CID49, red)

[Snowiffic]

Good tutorial, it works for me! Is there also a way to remove the simlock with the standard dcu-60 cable?
(k750, CID49, red)

No

[Predas]

i've got just one question...
my phone is cid 36 brown...the original firmware is europe 1 since i'm from portugal...
can i use EMEA6? or i've got to flash it with an w800 europe 1 firmware?

[dogan]

the links for the packages dont work.

Both the 4shared and the rapidshare links dont work!

[STP™]

excellent tutorial i know a few people who are trying to flash their k750i>w800i , so i'll point them to this thread , once again, good work

[circlensess]

Do you need to flash both FS and MAIN files to get walkman like in W800 functionality? Cant you just flash the W800 MAIN file?

This post has been edited by circlensess: 2007-08-18 23:14

[Sturmeh]

Worked perfectly!
Highly recommended for even AUSSIES.

It helped me flash my k750i ( CID49 ) to w800i and at the same time DEBRAND IT !
( Note: It does not unlock, as that requires a SERVICE CABLE. )

Now...

When I first turned on my phone after flashing, THERE WERE NO FONTS.
Well once I put my PIN in, it once again began customizing or something...

Then the set-up wizard took care of it.

It works with YES OPTUS, so that's good.

And for those that miss the Activity menu, you can press UP on the nav-stick to access quick shortcuts, now we are only missing EVENTS.

Be sure to follow the breakin procedure word for word, it works well, but can make you panic.

( Just remember, 30 seconds is a long time, but do it straight away. )

[superior911]

Hello!
Where can i get the package?

[circlensess]

Hello!
Where can i get the package?

http://rapidshare.com/files/12706205/K750toW800.rar.html

If you just want the functions of W800, you ONLY have to flash MAIN...
which is in the package... 18,575,328 W800_R1BC002_MAIN_EU_EMEA.bin

So skip everything except STEP 3...

STEP3: Flashing FS.

• For CID36: Your phone is already detected by XS++. Under Select Firmware, check Flash File System, and then click ’…’ , now select the file ‘W800_R1BC002_FS_EMEA6.bin’ inside W800 Firmware folder. Hit flash… the flashing process is now initiated. After completion of 291 blocks, it will say either ‘done flashing’ or hang at ‘finishing flash’. Don’t worry about it. Close the program and unplug phone. Again take-out and reinsert battery to refresh. Goto STEP4.

• For CID49: Inside XS++, Under Select Firmware, check Flash File System, and then click ’…’ , now select the file ‘FSFLASH.bin’ in the C:\ drive which we generated from Gslide. Hit flash to start flashing process. After completion of 291 blocks, it will say either ‘done flashing’ or hang at ‘finishing flash’. Don’t worry about it. Close the program and unplug phone. Again take-out and reinsert battery to refresh.

------------------

Here is a torrent file with all the programs, drivers and flashes... You need to change the .TXT file name extension to be able to use it with utorrent or bitcomet to .Torrent

Far manager V1.7 and how to copy the new drivers.. Camera, Acoustics, Themes etc...
K750-R1BCA021 main, FS, emea4 CID36/49 RED and custom packs...
W800-R1BC002 FS, MAIN etc...
Gflash20b6
GSlide
XS++
Audio tuning etc etc etc...

This post has been edited by circlensess: 2007-09-02 12:11

Attached File(s)

 Sony_Ericsson_WALKMAN___Cyber_Shot_modding___tunning.rar.txt ( 20.05K ) Number of downloads: 55

 

[chronoslayer]

Guys, I'm having a hard time trying to mod my k750. My phone doesn't seem to be detected using XS++, my phone seems to automatically turn on while being connected to the pc, this sux!! I'm trying to look for the R1L002 firmware or any that supports playback for .swf files. (Just being able to play animations and loops would be great!)

Is there anyone who could help me with this, I'm desperately looking for an aswer but can't seem to find it!!

I would greatly appreciate replies and help. Thanks everyone!!

[Quiksilver4Eyes]

I am getting the same problem. It doesn't work that often but it has occassionaly. It always works with FAR manager but not on this.