[D750/K750/W800] Opening the Housing II |
  |
[D750/K750/W800] Opening the Housing II |
 2005-08-23 13:15
Post
#1
|
|
 [Modder Team]  Group: Members Posts: 368 Joined: 2005-06-17 Member No.: 727  |
Ok, I've carried out this mod several times now (can't make up my mind what combo I want :omg: ) and decided to open a new thread for this 'How-To'. I'm NOT calling it MY 'How-To' simply because the images and initial reference material used have been taken from our good se-nse friend 'gbrooks3' .. and www.52sony.com. A big thanks to gbrooks3 as the recognised originator!
 Best way to view my 'How-To's normally would be to view posts as 'oldest first' - that way the images/instructions are in order.I've uploaded version II as a Word doc to: http://www.megaupload.com/?d=27FBKF0Y if anyone wishes to download it for free for future reference. Please DO NOT post any replies until I've completed this .. I'll let you know when I'm done. Disclaimer: As always, I am not responsible for your inability to carry out this mod successfully or read these instructions properly - they are a guide to what can be done and you do so at your own risk. Case01: Remove the batt cover, batt and simcard. Using a penknife or small flat screwdriver tease and prise the cover off. TIP - you may find it easier to prise in a downwards direction to 'pop' the clips. Case02: As above. Case03: Once off, this is what you've got. Lift of the numbered keyped. Case04: Remove the key pressure pad and backing by lifting the pad (like a chest lid). You'll see the PCB connector - gently ease this off with your screwdriver. This post has been edited by rabvtec: 2005-10-19 09:50
Attached File(s)
RabCase01.jpg ( 30.9K )
Number of downloads: 15915
RabCase02.jpg ( 35.84K )
Number of downloads: 18739
RabCase03.JPG ( 207.32K )
Number of downloads: 13410
RabCase04.JPG ( 56.12K )
Number of downloads: 17116-------------------- Woman: "Sir, if you were my husband, I'd poison your tea".
Man: "Madam, if you were my wife ... I'd drink it!". |
 |
 
|
|
2005-08-23 13:24
Post
#2
|
|
|
[Modder Team] Group: Members Posts: 368 Joined: 2005-06-17 Member No.: 727 |
Case05: WARNING! There are 2 tiny brass-like clips on the black plastic backing piece. DO NOT lose these! These are your 'earths' for the keypad. Bl**dy nightmare to get back on ..
Case06: Assembly removed, you can see a) one of the clips B) the PCB connector just above it and c) the camera button. There is NO need to seperate as in the image - illustration purposes only. Case07: Remove the LCD by unscrewing the 2 x T6 screws (circled red - already removed here) and unplug the LCD connector (circled yellow). Case08: Ease the circuit over the joystick and lift the screen clear. This post has been edited by rabvtec: 2005-10-02 18:05
Attached File(s)
RabCase05.JPG ( 59.32K )
Number of downloads: 17439
RabCase06.jpg ( 55.25K )
Number of downloads: 11853
RabCase07.JPG ( 59.81K )
Number of downloads: 12027
RabCase08.jpg ( 71.27K )
Number of downloads: 9488-------------------- Woman: "Sir, if you were my husband, I'd poison your tea".
Man: "Madam, if you were my wife ... I'd drink it!". |
|
|
|
|
2005-08-23 13:34
Post
#3
|
|
|
[Modder Team] Group: Members Posts: 368 Joined: 2005-06-17 Member No.: 727 |
Case09: To remove the PCB itself, using a small screwdriver, work your way around the chassis prising the board up and free. Now, from the top of the phone, lift it up and pull it free from the base (FastPort) connector. PIC - PCB already partially lifted.
Case10: Before it can be totally free, unplug the camera and feed it through the hole in the PCB. Case11: We now see the camera unit and ribbon. Ease the ribbon off with your screwdriver. Case12: The camera unit can now be persuaded out of its hole - Stop bl**dy playing with it .. yes, YOU! ^__^ It's not a toy! This post has been edited by rabvtec: 2005-10-02 18:06
Attached File(s)
RabCase09.jpg ( 40.52K )
Number of downloads: 9170
RabCase10.jpg ( 30.4K )
Number of downloads: 7915
RabCase11.jpg ( 53.17K )
Number of downloads: 9195
RabCase12.jpg ( 39.11K )
Number of downloads: 6266-------------------- Woman: "Sir, if you were my husband, I'd poison your tea".
Man: "Madam, if you were my wife ... I'd drink it!". |
|
|
|
|
2005-08-23 13:43
Post
#4
|
|
|
[Modder Team] Group: Members Posts: 368 Joined: 2005-06-17 Member No.: 727 |
Case13: WARNING! This small piece (circled) fell out whilst turning the chassis over - heart attack! It's the bluetooth contact - remember where it goes and don't lose it!
Case14: The next two pieces are stickered on. Gently peel the camera switch (circled) and LEDs (arrowed) off the chassis. Keep your fingers away from the sticky bit as much as possible. Case15: As above. Case16: WARNING! Be extremely careful of this switch as it's the 'trigger' for your camera. TIP - on re-assembly, I slid open the lens cover first before putting the cover on to ensure the lens cover mechanism stayed clear of the switch in case of damage. This post has been edited by rabvtec: 2005-10-02 18:07
Attached File(s)
RabCase13.jpg ( 46.35K )
Number of downloads: 13997
RabCase14.JPG ( 42.47K )
Number of downloads: 8797
RabCase15.jpg ( 37.32K )
Number of downloads: 8059
RabCase16.jpg ( 38.23K )
Number of downloads: 11422-------------------- Woman: "Sir, if you were my husband, I'd poison your tea".
Man: "Madam, if you were my wife ... I'd drink it!". |
|
|
|
|
2005-08-23 13:55
Post
#5
|
|
|
[Modder Team] Group: Members Posts: 368 Joined: 2005-06-17 Member No.: 727 |
Case17: This is the speaker assembly. To remove, it's prised and peeled out of the chassis (there's a sticky section around the speaker).
Case18: The antenna assembly proved quite a challenge. Familiarise yourself first! Easiest way (for me) was, on the other side of this image is two small clips that are part of the plastic - I eased these in to free the assembly Case19: The '********' and its green silicone jacket come out easily. talking of silicone, be careful when removing the buttons - they're also on silicone sheets and can tear easily. Patience and gentle persuasion again. Case20: This is basically your phone now .. ermm, how does it go back together? :0 TIP - remember how it came apart as re-assembly is reversal of this procedure! That's it! You may now post replies/comments! Ensure that you have all that you need before starting. Read right the way through this guide FIRST! A anti-static wrist strap would probably be a wise investment. Enjoy! This post has been edited by rabvtec: 2005-10-02 18:09
Attached File(s)
RabCase17.jpg ( 27.62K )
Number of downloads: 4149
RabCase18.jpg ( 30.39K )
Number of downloads: 4122
RabCase19.jpg ( 20.97K )
Number of downloads: 4671
RabCase20.jpg ( 43.96K )
Number of downloads: 14393-------------------- Woman: "Sir, if you were my husband, I'd poison your tea".
Man: "Madam, if you were my wife ... I'd drink it!". |
|
|
|
|
2005-08-23 14:04
Post
#6
|
|
 Se-nsei Group: Members Posts: 6,498 Joined: 2005-03-01 From: The Netherlands Member No.: 11 Mobile: i-mate K-JAM |
Mention of the handset in the topic title might have been a good idea
Nice guide though 
-------------------- I am the Law!
 |
|
|
|
|
2005-08-23 14:15
Post
#7
|
|
|
[Modder Team] Group: Members Posts: 368 Joined: 2005-06-17 Member No.: 727 |
DOH .. of course - cheers Eggy!
 ps how do I go about changing/editing my thread titles if I wanted to? -------------------- Woman: "Sir, if you were my husband, I'd poison your tea".
Man: "Madam, if you were my wife ... I'd drink it!". |
|
|
|
|
2005-08-23 14:18
Post
#8
|
|
|
Se-nsei Group: Members Posts: 6,498 Joined: 2005-03-01 From: The Netherlands Member No.: 11 Mobile: i-mate K-JAM |
Unfortunately you can't so if you'ld like too you can send me a PM for instance or just request one in the thread itself. I've now also moved all the housing swap how-to guides to this section and added tags to all of them. This way it'll be easy for members to look guides up for the phone(s) they have
-------------------- I am the Law!
|
|
|
|
|
2005-08-23 14:22
Post
#9
|
|
|
[Modder Team] Group: Members Posts: 368 Joined: 2005-06-17 Member No.: 727 |
Cheers Eggy .. I'll bear this in mind if I need an edit in future.
Nice move re the How-To's ..
-------------------- Woman: "Sir, if you were my husband, I'd poison your tea".
Man: "Madam, if you were my wife ... I'd drink it!". |
|
|
|
|
2005-09-03 11:10
Post
#10
|
|
 Naughty Boy Group: Members Posts: 1,166 Joined: 2005-08-17 From: London Member No.: 1,194 Mobile: w800i, T68i |
Heya Rabvtec, do you need soldering skills for this mod? I know that 3.5mm plug mod needed it pretty bad, but unless you rip the phone to pieces this isn't a mod that needs it, right?
Just a bit worried because last time I soldered was when I was 14 or something and nearly burnt the DT lab down
|
|
|
|
|
2005-09-03 12:52
Post
#11
|
|
|
[Modder Team] Group: Members Posts: 368 Joined: 2005-06-17 Member No.: 727 |
@stepdown - no mate, no soldering skills required for a housing swap!
All I'd say is that you work thru the 'How-To' methodically and take your time to remember where everything went. If you have a digital camera, a photo history may help on reassembly!
-------------------- Woman: "Sir, if you were my husband, I'd poison your tea".
Man: "Madam, if you were my wife ... I'd drink it!". |
|
|
|
|
2005-09-10 04:00
Post
#12
|
|
 Makes Se-nse Group: Members Posts: 349 Joined: 2005-09-10 From: t dot Member No.: 1,379 Mobile: w800i, seimens cf62 |
@rabvtec
any idea where to get a "Anti-Static Wrist Strap"?? i'd imagine most computer repair shops have them...but they dnt sell them...=PP |
|
|
|
|
2005-09-10 12:42
Post
#13
|
|
|
[Modder Team] Group: Members Posts: 368 Joined: 2005-06-17 Member No.: 727 |
@aznpos531 - yeah, any computer or electronic store should sell them. Or, you could try eBay: http://search.ebay.com/search/search.dll?h...8%26catref%3DC6
-------------------- Woman: "Sir, if you were my husband, I'd poison your tea".
Man: "Madam, if you were my wife ... I'd drink it!". |
|
|
|
|
2005-09-11 03:50
Post
#14
|
|
|
Makes Se-nse Group: Members Posts: 349 Joined: 2005-09-10 From: t dot Member No.: 1,379 Mobile: w800i, seimens cf62 |
@rabvtec
many thanks! |
|
|
|
|
2005-09-11 04:40
Post
#15
|
|
|
Non-se-nse Group: Members Posts: 114 Joined: 2005-03-17 Member No.: 108 |
Geez you're good! I already imagined myself sitting brain-dead of not knowing how to assemble it back!:lols: I better go someplace where luck can greatly help me do this!
-------------------- Enter the Thai Sony Ericsson World
http://www.myseeo.com |
|
|
|
|
2005-10-18 07:37
Post
#16
|
|
|
Makes Se-nse Group: Members Posts: 349 Joined: 2005-09-10 From: t dot Member No.: 1,379 Mobile: w800i, seimens cf62 |
sooooo sorry for asking this question again...i can't seem to find the thread where it was posted...-_- but my question is if the phone says "please open camera lens" when u use the camera function, how do you fix it? i know it has something to do with the camera trigger but iono how to fix it! help me plz...aorry again! =T
|
|
|
|
|
2005-10-18 09:30
Post
#17
|
|
|
Makes Se-nse Group: Members Posts: 349 Joined: 2005-09-10 From: t dot Member No.: 1,379 Mobile: w800i, seimens cf62 |
I've found the thread! it was in the other k750i thread.....now my question is do i have to take the phone completely apart to get to the camera trigger?! i was hoping to avoid this....=T
|
|
|
|
|
2005-11-04 23:18
Post
#18
|
|
|
n00b Group: Members Posts: 9 Joined: 2005-08-02 Member No.: 1,051 |
Nice work. I was going to do a write-up as well as I found this swap to be a major PITA. I also kept some other pieces from my old phone. The metal bar that you connect your wrist strap to, some small minor pad underneath one of the buttons, the green Sony Ericsson logo, the small mirror, etc.
Great write-up though. Very detailed. I likes a lot!
|
|
|
|
|
2005-11-12 15:45
Post
#19
|
|
|
n00b Group: Members Posts: 2 Joined: 2005-11-12 Member No.: 1,954 |
Hi there... great write up
However, after dissasembling my w800i, i put it back together and the LCD backlight doesn't work! Has anyone had the same problem and, more importantly, does anyone know how to fix it? Dave |
|
|
|
|
2005-11-17 02:38
Post
#20
|
|
|
n00b Group: Members Posts: 1 Joined: 2005-11-17 Member No.: 1,987 |
I lost my screws
 Does anybody know where I could get some replacements? Thanks
Attached File(s)
|
|
|
|
|
|
Lo-Fi Version | Time is now: 2009-11-21 23:10 |
